Canon 7921A011AA Instruction Manual - Page 85
Playback, Playing Back a Tape, Slide the POWER switch to PLAY VCR and TAPE/CARD switch to TAPE.
![]() |
View all Canon 7921A011AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Playing Back a Tape E / CARD TAPE You can use the LCD screen for instant, on-the-spot playback. The camcorder also plays back the sound track via the built-in speaker ( 87). • When you play back a tape, you can also close the LCD panel with its screen side facing outward. • When you're using the viewfinder to view playback, close the LCD panel. For playing back your recordings on a TV, see p. 93. For using the wireless controller, see p. 27. Note: • To avoid accidental recording, make sure that you slide the tab on the cassette so that it exposes the hole (the switch position is usually labelled SAVE or ERASE OFF). + TAPE PLAY (VCR) 1. Slide the POWER switch to PLAY (VCR) and TAPE/CARD switch to TAPE. • The power indicator lights up green. • The confirmation beep sounds. 2. Load the cassette. 3. Press the e (play) button to start playback. • Open the cover to use the buttons on the handle. • To end playback, press the 3 (stop) button. • To wind the tape forwards, stop playback and press the 1 (fast forward) button. • To wind the tape backwards, stop playback and press the ` (rewind) button. • If the playback picture is rough (mosaic-like noise), clean the video heads using a Canon DVMCL Digital Video Head Cleaning Cassette or a commercially available digital video head cleaning cassette. Playback 85
![](/manual_guide/products/canon-7921a011aa-instruction-manual-1429a58/85.png)