Canon 9426A002 EOS Rebel T2 manual - Page 34
Take the picture., The Difference Between <, > and <, About Program Shift
UPC - 013803038637
View all Canon 9426A002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
T Program AE 4 Take the picture. • Compose the shot and press the shutter button fully. • If " " and the maximum aperture value blink, it indicates underexposure. Use flash. • If " " and the minimum aperture value blink, it indicates overexposure. Use an ND filter to reduce the light entering the lens. The Difference Between and • The shutter speed and aperture value are set in the same way in both modes. • The following features can be used in the mode, but not in the mode. · Manual selection of AF mode and AF point · Film advance mode selection · Program shift · Exposure compensation · AEB · Custom Function · Depth-of-field preview · AE/FE lock with the button · Multiple exposures · Built-in flash manual firing and flash OFF · High-speed sync (with EX-series Speedlites) About Program Shift • In the Program AE mode, you can freely change the shutter speed and aperture value combination (program) set by the camera while retaining the same exposure. This is called program shift. • To shift the program, press the shutter button halfway and turn the dial until the desired shutter speed or aperture value is displayed. • Program shift is canceled automatically after the picture is taken. • Program shift cannot be set when the built-in flash is used. 34