Canon A530 PowerShot A540 / A530 Manuals Camera User Guide Advanced - Page 94
Image is blurred or out of focus., Subject in recorded image is too dark.
UPC - 013803062908
View all Canon A530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Image is blurred or out of focus. AF-assist Beam is set to [Off]. z In dark places where it is difficult for the camera to focus, the AF-assist Beam will emit to assist focusing. As the AF-assist Beam will not function when turned off, set it [On] to activate it (p. 24). Take care not to obstruct the AF-assist Beam with your hand when used. The camera moves when the shutter button is pressed. z Setting the self-timer to (2 seconds) delays the shutter release for 2 seconds after the shutter button is pressed and allows the camera to stop shaking, thus preventing a blurred image (p. 37). Even better results can be obtained by placing the camera on a stable surface or by using a tripod to shoot. Subject is out of focal range. z Shoot with the subject at the correct shooting distance (p. 118). The subject is hard to focus z Use the focus lock, AF lock or on. manual focus to shoot (p. 50). Subject in recorded image is too dark. Insufficient light for shooting. z Set the flash to (Flash on) (Basic Guide p. 8). The subject is z Set the exposure compensation to underexposed because the a positive (+) setting (p. 54). surroundings are too bright. z Use the spot metering function (p. 53). Subject is too far away for flash to reach. z Shoot within correct shooting distance of the subject when using the built-in flash (p. 118). z Raise the ISO speed and then shoot (p. 65). 92