Canon A710 PowerShot A710 IS Camera User Guide Camera User Guide Advanced - Page 54
Adjusting the Tone White Balance
![]() |
UPC - 013803071122
View all Canon A710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
2 Press the button several times until the exposure compensation bar is displayed. z Use the or buttons to adjust the exposure compensation and press the button. z Depending on the shooting mode, pressing the button will switch between the setting items as follows: mode/Exposure compensation Shooting direction selection/Exposure compensation Shutter speed/Exposure compensation/AF frame* Aperture value/Exposure compensation/AF frame* Exposure compensation/AF frame* * The AF frame can only be selected when [AF frame] is set to [FlexiZone] (p. 44) To Cancel the Exposure Compensation Follow procedure 2 to restore the compensation value to [0]. Adjusting the Tone (White Balance) Shooting Mode * * Cannot be set in and modes. Normally, the (Auto) white balance setting selects an optimal white balance. When the (Auto) setting cannot produce natural looking colors, change the white balance using a setting appropriate for the light source. 1 FUNC. Menu * (Auto). See Menus and Settings (p. 18). * Default setting. z Use the or button to select a white balance setting and press the FUNC./SET button. 52
![](/manual_guide/products/canon-a710-powershot-a710-camera-user-guide-camera-user-guide-advanced-2c7f55a/54.png)