Canon CP1013DII Instruction Manual - Page 4

When the PRINT switch is turned "ON", and the "ITEM" switch is at the "n+" or "n+/-" position, the number of items recorded by the counter can print up to three digits on the left-hand side of the paper by pressing either the key or the key for item count and key or key for memory item count. Set the switch to "AVE", after pressing the to total the entries, the calculator prints the average below the total. The number to the left of the total shows the number of entries in the calculation. PRINT / PAIR MODE CALCULATION SWITCH PRINT OFF: Entries and result will appear on the display but will not be printed out. PRINT ON: Entries and result will appear on the display and will be printed out. PAIR MODE CALCULATION: Set the switch to "PAIR", enables you to total two kinds of corresponding data at the same time. In the Pair mode, the first number entered and every alternate number entered after that is accumulated in the first register. Correspondingly, the second number and every alternate number entered after that is accumulated in the second register. Press key to simultaneously print out entries accumulated in both registers and obtain their Sub-total. Press key to simultaneously print out entries accumulated in both registers and obtain their total. This function can only be used for addition calculations. Multiplication and division are not possible. All entries and results in the first register and printed in black and those in the second register are printed in red. STORE / RECALL MEMORY KEY Pressing the key after entering the number clears the current store memory contents and stores the entered number in the store memory. Pressing the key without being preceded by any key recalls the current store memory contents. Entering zero clears the store memory contents. 3