Canon Canon 50D [OutFit] w/ 18-200mm 16GB EOS 50D Instruction Manual - Page 105
Using the Eyepiece Cover
UPC - 169050566116
View all Canon Canon 50D [OutFit] w/ 18-200mm 16GB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Bulb Exposures Using the Eyepiece Cover If you take a picture without looking at the viewfinder, light entering the eyepiece can throw off the exposure. To prevent this, use the eyepiece cover (p.23) attached to the camera strap. 1 Remove the eyecup. Push the bottom of the eyecup upward. 2 Attaching the eyepiece cover. Slide the eyepiece cover down into the eyepiece groove to attach it. Connecting the Remote Switch You can connect the Remote Switch RS-80N3 or Timer Remote Controller TC-80N3 (both sold separately) or any EOS accessory equipped with an N3-type terminal to the camera and shoot with it. To operate the accessory, refer to its instruction manual. 1 Open the terminal cover. 2 Connect the plug to the remote control terminal. Connect the plug as shown in the illustration. To disconnect the plug, grasp the plug's silver part and pull out. 105