Canon Color imageCLASS LBP622Cdw imageCLASS LBP664Cdw / LBP623Cdw / LBP622Cdw - Page 35
Connecting to a Wireless LAN, Setting Up Connection Using WPS
View all Canon Color imageCLASS LBP622Cdw manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Setting Up Connecting to a Wireless LAN 3S2S-00J Wireless routers (or access points) connect the machine to a computer via radio waves. If your wireless router is equipped with Wi-Fi Protected Setup (WPS), configuring your network is automatic and easy. If your networking devices do not support automatic configuration, or if you want to specify authentication and encryption settings in detail, you need to manually set up the connection. Make sure that your computer is correctly connected to the network. Setting Up Connection Using WPS(P. 29) Manually Setting Up Connection(P. 30) Risk of information leak ● Use wireless LAN connection at your own discretion and at your own risk. If the machine is connected to an unsecured network, your personal information might be leaked to a third party because radio waves used in wireless communication can go anywhere nearby, even beyond walls. Wireless LAN security ● The wireless LAN function of this machine supports WEP, WPA-PSK, and WPA2-PSK. For the wireless security compatibility of your wireless router, see the instruction manuals for your networking devices or contact your manufacturer. Required devices for wireless LAN connection ● The machine does not come with a wireless router. Have the router ready as necessary. Setting Up Connection Using WPS When using WPS, two modes are available: push button mode and PIN code mode. ◼ Push Button Mode Find the WPS mark shown below on the package of your wireless router. Also make sure that there is a WPS button on your networking device. Setting Up Connection Using WPS Push Button Mode(P. 31) 29