Canon Color imageCLASS LBP623Cdw imageCLASS LBP664Cdw / LBP623Cdw / LBP622Cdw - Page 270
Specify the IKE Settings., Subnet Settings], Prefix Length], IKE Mode], Authentication Method]
View all Canon Color imageCLASS LBP623Cdw manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 270 highlights
Managing the Machine Description Example Entering a single address IPv4: Delimit numbers with periods. 192.168.0.10 IPv6: fe80::10 Delimit alphanumeric characters with colons. Specifying a range of addresses Insert a hyphen between the addresses. 192.168.0.10-192.168.0.20 [Subnet Settings] When manually specifying IPv4 address, you can express the range by using the subnet mask. Enter the subnet mask using periods to delimit numbers (example:"255.255.255.240"). [Prefix Length] Specifying the range of IPv6 addresses manually also allows you to specify the range using prefixes. Enter a range between 0 and 128 as the prefix length. [Local Port]/[Remote Port] If you want to create separate policies for each protocol, such as HTTP or WSD, click the [Single Port] radio button and enter the appropriate port number for the protocol to determine whether to use IPSec. IPSec is not applied to the following packets ● Loopback, multicast, and broadcast packets ● IKE packets (using UDP on port 500) ● ICMPv6 neighbor solicitation and neighbor advertisement packets 9 Specify the IKE Settings. [IKE Mode] The mode used for the key exchange protocol is displayed. The machine supports the main mode, not the aggressive mode. [Authentication Method] Select [Pre-Shared Key Method] or [Digital Signature Method] for the method used when authenticating the machine. You need to enable TLS for the Remote UI before selecting [Pre-Shared Key Method]. You need to generate or install the key and certificate before selecting [Digital Signature Method]. Configuring the Key and Certificate for TLS(P. 250) [Valid for] Specify how long a session lasts for IKE SA (ISAKMP SA). Enter the time in minutes. 264