Canon Color imageCLASS LBP712Cdn imageCLASS LBP712Cdn User Guide - Page 199

Network 3 Specify the IP address, subnet mask, and gateway address (or default gateway). ● Select the item to set, press , enter an address, and press . How to enter addresses ● Use / to move to the target field (a period-delimited input area), and use the numeric keys to increase/decrease the value. When you are unsure of the IP address to input ● The IP address can be determined from the router settings of the network. Address to Assign to the Machine(P. 193) Determining the IP 5 Perform a hard reset. Performing a Hard Reset(P. 499) ➠ The settings are enabled after the hard reset is performed. Checking whether the settings are correct ● Make sure that the Remote UI screen can be displayed with your computer. Starting Remote UI(P. 336) If you have changed the IP address after installing the printer driver ● By following the procedure for changing the standard TCP/IP port described in the "Printer Driver Installation Guide", specify the port to use again. Determining the IP Address to Assign to the Machine When you want to use a fixed IP address for the machine, you can determine the IP address as shown below. ◼ To Determine the IP Address An IP address consists of four numbers delimited by a period (.) (example: 192.168.1.45). Each number must be in the range from 0 to 255. In general, set the first three numbers to be the same as those for the router because they are common in the network. Determine the last number (for example, 45 in 192.168.1.45) that is different from that for other devices. 193