Canon Color imageCLASS MF644Cdw imageCLASS MF746Cdw/MF745Cdw/MF743Cdw/MF741Cdw - Page 158

Basic Operations ● Paper guides that are too loose or too tight can cause misfeeds or paper jams. 5 Insert the paper drawer into the machine. ● When you insert the paper drawer with set to , a confirmation screen is displayed. (P. 593) When loading longer paper than A4 size ● When the extended paper drawer is inserted, its front side is not flush with the machine. Place the legal dust cover over the open part of the paper drawer. MF746Cdw / MF745Cdw / MF743Cdw / MF741Cdw MF644Cdw / MF642Cdw / MF641Cw » Continue to Specifying Paper Size and Type in the Paper Drawer(P. 162) When changing the paper size or type ● The factory default settings for paper size and type are and , respectively. If you load a different size or type of paper into the machine, make sure to change the settings. If you do not change the settings, the machine cannot print properly. Printing on the Back Side of Printed Paper (Manual 2-Sided Printing) ● You can print on the back side of printed paper. Flatten any curls on the printed paper and insert it into the paper drawer or multi-purpose tray ( Loading Paper in the Multi-Purpose Tray(P. 151) ), with the side to print face up (previously printed side face down). - When using the multi-purpose tray, load one sheet of paper each time you print. - You can use only the paper printed with this machine. - You cannot print on the side that has previously been printed on. - If the printouts look faded, set the target paper source to in . (P. 491) - If you are using A5 size paper, the reverse side may not be printed correctly. LINKS Available Paper(P. 664) 150