Canon Color imageCLASS MF731Cdw imageCLASS MF735Cdw/MF733Cdw/MF731Cdw Getting - Page 28
Appendix
View all Canon Color imageCLASS MF731Cdw manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Appendix Important Safety Do not install in the following locations The machine may drop or fall, resulting in injury. • Keep the machine as far as possible from digital cordless phones, microwave ovens, or Instructions • An unstable location • A location exposed to vibrations other equipment that emits radio waves. • Do not use near medical equipment. Radio This chapter describes important safety CAUTION waves emitted from this machine may interfere with medical equipment, which may instructions for the prevention of injury to users of this machine and others, and damage to property. Read this chapter before using the machine, and follow the instructions to use the machine properly. Do not perform any Do not install in the following locations Doing so may result in damage to the machine. • A location subject to temperature and humidity extremes, whether low or high result in malfunctions and accidents. Power Supply WARNING • Use only a power supply that meets the operations not described in this manual. Canon will not be responsible for any damages resulting from operations not described in this manual, • A location subject to dramatic changes in temperature or humidity • A location near equipment that generates specified voltage requirements. Failure to do so may result in a fire or electrical shock. • Do not use power cords other than the one improper use, or repair or changes not performed by Canon or a third party authorized magnetic or electromagnetic waves • A laboratory or location where chemical provided, as this may result in a fire or electrical shock. by Canon. Improper operation or use of this machine could result in personal injury and/or damage requiring extensive repair that may not reactions occur • A location exposed to corrosive or toxic gases • A location that may warp from the weight of • The provided power cord is intended for use with this machine. Do not connect the power cord to other devices. be covered under your Limited Warranty. the machine or where the machine is liable to sink (a carpet, etc.) • Do not modify, pull, forcibly bend, or perform any other act that may damage the power WARNING Indicates a warning concerning operations that may lead to death or injury to persons if not performed correctly. To use the machine Avoid poorly ventilated locations This machine generates a slight amount of ozone and other emissions during normal use. These emissions are not harmful to health. However, cord. Do not place heavy objects on the power cord. Damaging the power cord may result in a fire or electrical shock. • Do not plug in or unplug the power plug with safely, always pay attention to these warnings. CAUTION Indicates a caution concerning operations that may lead to injury to persons if not performed correctly. To use the machine safely, always pay attention to these cautions. IMPORTANT Indicates operational requirements and restrictions. Be sure to read these items carefully to operate the machine correctly and avoid damage to the machine or property. Installation To use this machine safely and in a trouble-free way, carefully read the following precautions and install the machine in an appropriate location. WARNING Do not install in a location that may result in a fire or electrical shock • A location where the ventilation slots are blocked (too close to walls, beds, sofas, rugs, or similar objects) • A damp or dusty location • A location exposed to direct sunlight or outdoors • A location subject to high temperatures • A location exposed to open flames • Near alcohol, paint thinners or other flammable substances they may be noticeable during extended use or long production runs in poorly ventilated rooms. To maintain a comfortable working environment, it is recommended that the room where the machine operates be appropriately ventilated. Also avoid locations where people would be exposed to emissions from the machine. Do not install in a location where condensation occurs Water droplets (condensation) may form inside the machine when the room where the machine is installed is heated rapidly, and when the machine is moved from a cool or dry location to a hot or humid location. Using the machine under these conditions may result in paper jams, poor print quality, or damage to the machine. Let the machine adjust to the ambient temperature and humidity for at least 2 hours before use. In altitudes of above sea level 3,000 m or higher Machines with a hard disk may not operate properly when used at high altitudes of about 3,000 meters above sea level, or higher. Leveling feet (only for products with leveling feet) Do not remove the machine's leveling feet after the machine has been installed, as this may cause the machine to fall or tip over, resulting in personal injury. Connecting the Telephone Line (Only for wet hands, as this may result in an electrical shock. • Do not use extension cords or multi-plug power strips with the machine. Doing so may result in a fire or electrical shock. • Do not wrap the power cord or tie it in a knot, as this may result in a fire or electrical shock. • Insert the power plug completely into the AC power outlet. Failure to do so may result in a fire or electrical shock. • Remove the power plug completely from the AC power outlet during a thunder storm. Failure to do so may result in a fire, electrical shock, or damage to the machine. • Make sure that the power supply for the machine is safe, and has a steady voltage. • Keep the power cord away from a heat source; failure to do this may cause the power cord coating to melt, resulting in a fire or electrical shock. • If excessive stress is applied to the connection part of the power cord, it may damage the power cord or the wires inside the machine may disconnect. This could result in a fire. Avoid the following situations: -- Connecting and disconnecting the power cord frequently. -- Tripping over the power cord. -- The power cord is bent near the connection part, and continuous stress is being applied to the power outlet or the connection part. -- Applying excessive force on the power plug. Other warnings Products with a Fax Function) CAUTION En • Do not connect unapproved cables to this machine. Doing so may result in a fire or This machine conforms to a analog telephone Install this machine near the power outlet and line standard. The machine can be connected to leave sufficient space around the power plug so electrical shock. the public switched telephone network (PSTN) that it can be unplugged easily in an emergency. • Do not place necklaces and other metal objects or containers filled with liquid on the machine. If foreign substances come in contact with electrical parts inside the machine, it may result in a fire or electrical shock. • When installing and removing the optional accessories, be sure to turn OFF the power, unplug the power plug, and then disconnect all the interface cables and power cord from the machine. Otherwise, the power cord or interface cables may be damaged, resulting in a fire or electrical shock. • If any foreign substance falls into this machine, unplug the power plug from the AC power outlet and contact your local authorized Canon dealer. only. If you connect the machine to a digital telephone line or a dedicated telephone line, it might impede proper operation of the machine and could be the cause of damage. Make sure to confirm a type of telephone line before connecting the machine. Contact your optical fiber line or IP telephone line service providers if you want to connect the machine to those telephone lines. When using wireless LAN (only for products with a wireless LAN function) • Install the machine at a distance of 50 meters or less from the wireless LAN router. • As far as possible, install in a location where communication is not blocked by intervening objects. The signal may be degraded when passing through walls or floors. IMPORTANT When connecting power • Do not connect the power cord to an uninterruptible power source. Doing so may result in malfunction of or damage to the machine at power failure. • If you plug this machine into an AC power outlet with multiple sockets, do not use the remaining sockets to connect other devices. • Do not connect the power cord to the auxiliary AC power outlet on a computer. Other precautions Electrical noise may cause this machine to malfunction or lose data. 28