Canon D1170 imageCLASS D1180/D1170/D1150/D1120 Starter Guide - Page 9
Connect Power Cord and Turn On the Machine - cartridge
UPC - 013803106824
View all Canon D1170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
2 Set Up the Machine Connect Power Cord and Turn On the Machine 1 Connect the power cord into the rear socket on the back side of the machine and the wall outlet, and press the [I] side of the main power switch (A) to turn ON. 3 appears, press or to select the country, and press [OK]. COUNTRY/REGION UNITED STATE - Do not connect the machine and the computer with a USB cable at this time. Connect the machine and the computer with a USB cable only during the software installation procedure. (A USB cable is not used when the machine is used via a network connection.) - If you want to use the optional paper cassette, attach the Cassette Feeding Module-U1 to the machine before turning ON the machine. (For instructions on how to attach the Cassette Feeding Module-U1, see the instruction sheet that comes with the Cassette Feeding Module-U1.) 2 appears, press or to select the language, and press [OK]. DISPLAY LANGUAGE ENGLISH If you want to change the display language at a later time, press [Menu] → → , then select the language. - Make sure that the country/region is selected correctly. If not, sending/receiving faxes may not work properly. - For imageCLASS D1180/D1170/D1150, it is possible to change the country/region at a later time. To change the country/region, press [Menu] → → → , then select the country/region. 4 The machine enters the standby mode. 0 1 1 0 0 % LTR TEXT/PHOTO 5 Turn OFF the main power on the right side of the machine, then turn ON the power to restart the machine. ● The display returns to the standby mode: The machine may enter the standby mode (Auto Clear function) while you are setting it up. Make the setting again from the main menu. ● The display turned OFF: The machine may enter the Sleep mode while you are performing setup. Press [Energy Saver] to turn the display back ON and continue the setup. ● is displayed: Check the installation of the toner cartridge and the placement of the paper. (See Unpacking Instruction Sheet and "Set Up Paper Cassette and Load Paper," on p. 4.) ● is displayed: Make sure that the front cover and scanning platform are closed properly. (See Unpacking Instruction Sheet.)