Canon D320 imageCLASS D320/D340 Basic Guide - Page 74
General Problems, Printing Problems
UPC - 013803016468
View all Canon D320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Printing Problems ❚ The Alarm indicator comes on. The machine may have a paper jam, or there may be no paper in the cassette or multi-purpose tray. • Clear the paper jam, or load paper in the cassette or multi-purpose tray. (→ pp. 8-1 to 8-4, 2-3 to 2-7) • If the machine has no paper jam, or paper is loaded in the cassette or multi-purpose tray, unplug the machine and wait approx. 3-5 minutes, then plug it in again. If the problem is fixed, the Alarm indicator will turn off, and the LCD will return to standby mode. If the Alarm indicator remains lit, unplug the machine, and call your service representative. ❚ Printout does not match paper size. Paper may not be loaded and aligned correctly in the cassette or multi-purpose tray. • Make sure the paper is loaded and aligned correctly. (→ pp. 2-3 to 2-7) General Problems ❚ The machine has no power. The power cord may not be plugged in securely. • Check that the power cord is plugged securely into the machine and into the wall outlet. Insert the power cord straight into the power cord connector on the left side of the machine. Do not insert it at an angle. Otherwise, the machine may not be properly connected to the power source and may not turn on. If this happens, disconnect the power cord, and reconnect it correctly after a minute or more. (→ Set-Up Sheet) ❚ Nothing appears in the LCD. The power cord may not be plugged in securely. • Check that the power cord is plugged securely into the machine and into the wall outlet. Insert the power cord straight into the power cord connector on the left side of the machine. Do not insert it at an angle. Otherwise, the machine may not be properly connected to the power source and may not turn on. If this happens, 8 disconnect the power cord, and reconnect it correctly after a minute or more. (→ Set-Up Sheet) If the LCD remains blank, unplug the machine and wait more than approx. 3-5 minutes until the temperature inside the machine lowers, then plug it in again. If the LCD remains blank, unplug the machine, and call your service representative. Troubleshooting The Energy Saver key lights up. • The energy saver mode activates. To restore the machine from the energy saver mode, press Energy Saver. ❚ The letter "E" and numbers appear in the LCD. An abnormality has occurred in the machine. • Unplug the machine and wait approx. 3-5 minutes, then plug it in again. If the message is still displayed, unplug the machine and call your service representative. 8-11