Canon DR-2010M User Manual - Page 24
Placing Documents, Feeding in the Separation Mode
UPC - 013803117967
View all Canon DR-2010M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Contents Back Previous Page Next Page 3. Placing Documents There are two methods for feeding documents, the Page Separation mode and Bypass mode. Feeding pages continuously from a stack of documents placed in the feed tray is called the Page Separation mode. Feeding documents one sheet at a time or feeding documents consisting of multiple pages that are attached, is called the bypass mode. The document feed method can be changed by moving the feed selection lever. 3 Fan the pages of the document to be scanned, and shift them so that the top of the first page (the bottom of the front of the document) is the lowest. (Place the document so that the top of the document is facing down.) Feeding in the Page Separation Mode 1 Switch the feed selection lever to (Page Separation). CAUTION When placing documents into the feed tray, take care not to cut your hands on the edges of the paper. 4 Place the document with the reverse side facing you, and the top of the document facing down. 2 Adjust the document guides to fit the width of the document to be scanned. Insert the document with the reverse side facing you IMPORTANT There is a load limit mark ( ) on the document guides. Do not stack documents higher than this mark (approximately 50 sheets of 20 lb bond (80 g/m2) paper.) Doing so may cause a paper jam. 24