Canon Digital Rebel EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual
Canon Digital Rebel - EOS 6.3MP Digital Rebel Camera Manual
UPC - 013803028997
View all Canon Digital Rebel manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon Digital Rebel manual content summary:
- Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 1
INSTRUCTION MANUAL E E INSTRUCTION MANUAL - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 2
EOS DIGITAL REBEL/EOS 300D DIGITAL is a high-performance, digital AF SLR camera with an ultra-fine CMOS sensor with 6.30 million effective pixels. It is full-featured for all types of shooting, from fully automatic snapshooting to highly creative work. You can use all Canon EF and EF-S lenses and - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 3
CD-ROM) ¢ Pocket Guide Quick guide to using the camera. ¢ EOS DIGITAL REBEL/EOS 300D DIGITAL Instructions (which you are reading now) ¢ Installing the Software Correctly Explains the software installation and features. ¢ EOS DIGITAL REBEL/EOS 300D DIGITAL Software Instructions Explains the procedure - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 4
Default Settings 31 MENU Setting the Date and Time 32 Replacing the Date/Time Battery 33 MENU Cleaning the Image Sensor (CMOS 34 Dioptric Adjustment 36 Holding the Camera 36 4 2 Fully Automatic Shooting ..... 37 YFully Automatic Shooting .. 38 Programmed Image Control Modes 40 MENU Reviewing - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 5
the Camera to the Printer 100 Printing 102 7 DPOF: Digital Print Order Format ... 109 MENU Print Order 110 Direct Printing with DPOF .... 116 8 Reference 121 Function Availability Table .... 122 AF Modes and Drive Modes 123 Troubleshooting Guide ......... 124 Error Codes 127 Major Accessories - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 6
It may cause an accident. • Do not fire the flash near a person's eyes. It may impair the person's vision. When using flash to photograph an infant, keep at least 1 meter away. • Before storing the camera or accessory when not in use, remove the battery pack and disconnect the power plug. This is to - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 7
-up battery can also become hot and cause skin burns. • Do not use paint thinner, benzene, or other organic solvents to clean the equipment. Doing so may cause fire or a health hazard. If the product does not work properly or requires repair, contact your dealer or your nearest Canon Service Center - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 8
by your Canon dealer beforehand, or check for yourself that the camera components are working properly. LCD Panel and LCD Monitor • The LCD monitor is manufactured with very high precision technology. However, there may be a few dead pixels where a black or red pixel is always displayed. They number - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 9
LCD display becomes extremely soiled, consult your nearest Canon dealer. • By their nature, LCD displays react more slowly at low temperatures, and may appear dark at high temperatures. The display will return to normal at room temperature. Lithium Battery the lens from the camera, attach the lens - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 10
) Power switch (p.26) Drive mode selection button (p.65) Built-in flash (p.80) Flash-sync contacts 〈l〉 Main dial (p.27) Shutter button (p.26) Red-eye reduction /Self-timer lamp (p.82/44) Remote control sensor Grip (Battery compartment) DC coupler cord hole (p.22) Mirror (p.34) Contacts (p.9) Hot - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 11
/ Enlarge button (p.62/89,106) Strap mount (p.17) ISO speed set button (p.50) CF card slot cover (p.24) Access lamp (p.25) Battery compartment cover release lever (p.20) Battery compartment cover (p.20) Date/time battery (in battery compartment) (p.33) CF card slot (p.24) CF card eject button - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 12
Nomenclature LCD Panel Shutter speed Busy ( ) Date/time battery level warning ( ) ISO Speed Camera starting ( ) AF point selection ( ) CF card light M Flash , Custom Battery level w e r Exposure level indicator Exposure compensation amount AEB level CF card writing status D ISO speed F Red- - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 13
Viewfinder Information Focusing screen Nomenclature AF point display indicator 〈.〉 AF points 〈j〉 AE lock / FE lock AEB in progress 〈M〉 Flash-ready Improper FE lock warning 〈 〉 High-speed sync (FP flash) Shutter speed FE lock ( ) Busy ( ) Aperture value 〈n〉 Focus confirmation light Maximum - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 14
is press the shutter button. Y: Full Auto (p.38) Allows you fully automatic shooting-the camera makes all the settings. Image Zone Flash off (p.41) 14 2 Creative Zone Lets you make a variety of settings. T : Program AE (p.66) R : Shutter-priority AE (p.68) E : Aperture-priority AE (p.70) W : Manual - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 15
Charger CB-5L This is a battery pack charger. (p.18) Power cord Nomenclature Battery pack slot Red lamp Power cord socket AC Adaptor Kit ACK-E2 (optional) Supplies power to the camera from a household power outlet. (p.22) AC Adaptor AC-E2 DC coupler side DC coupler socket DC coupler plug DC - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 16
in parentheses (p.00). • For explanatory purposes, the instructions show the camera attached with an EF-S18-55mm f/3.5-5.6 lens. • The menu descriptions assume that the default settings have been set. • The MENU label indicates the menu settings that can be changed. • The icons and ( √) indicate - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 17
1 Before You Start This chapter explains a few preliminary steps and basic camera operations. Attaching the Strap Pass the end of the strap through the camera's strap mount from the bottom. Then pass it through the strap's buckle as shown in the illustration. Pull the strap to make sure it does - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 18
•• Connect the power plug to an AC outlet. mark 18 Remove the cover. 2 • If you remove the battery from the camera, be sure to reattach the cover to protect against short circuit. Attach the battery. 3 • Align the battery's top edge with the mark on the charger. While pressing down the - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 19
-511 or BP-512. • If the battery is left in the camera for a prolonged period without the camera being used, a low electrical current may be discharged excessively and the battery's service life may be affected. When not using the camera, remove the battery and attach the protective cover to prevent - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 20
open the cover. Insert the battery into the camera. 2 Point the battery contacts downward. •• Insert the battery pack until it locks into place shut. Battery Pack BP-512 can also be used. Battery Level Icons The level of charge remaining is shown in three stages when the Power switch is set to . - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 21
Shooting conditions No flash use 50% flash use Normal (20°C/68°F) Approx. 600 Approx. 400 Low (0°C/32°F) Approx. 450 Approx. 350 • The figures above are based on Canon's standard testing conditions (w/fully charged battery, EF-S18-55mm f/3.5-5.6 lens, image review [ON], review time of [2 sec - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 22
ACK-E2 (optional), you can connect the camera to a household power outlet and not worry about the battery becoming exhausted. Connect the DC Coupler. 1 groove without damaging it. 4 Insert the DC coupler into the camera. • Open the battery compartment cover and open the DC Coupler cord notch cover. • - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 23
set to , autofocus will not operate. 4 Remove the front lens cap. Detaching the Lens While pressing the lens release button, turn the lens as shown by the arrow. • Turn the lens until it stops, then detach it. The EF-S lens is dedicated to this camera. It cannot be attached to other EOS - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 24
or Type II CF card can be inserted into the camera. Installing a CF Card Open the cover. 1 Canon is recommended. • With the CF card label side (the side with the printed mark) facing toward the rear of the camera set the Power switch to , the number of shots remaining will be displayed on the LCD - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 25
cover. • Remove the battery. This is to prevent damage to the image data, CF card, or camera. • The menu cannot be used during image processing after image capture and while the image is being recorded onto the CF card (access lamp blinks). If " "(Error CF) is displayed, see page 98. •• If - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 26
down halfway activates autofocusing (AF), and also activates the automatic exposure (AE) mechanism and sets the shutter speed and aperture value. The exposure (the combination of shutter speed and aperture value) appears on the LCD panel and in the viewfinder (˜). Full pressing This releases the - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 27
halfway, the camera is ready to shoot. • You can select the AF point or set the ISO speed and white balance. (2) Just turn the dial. While referring to the LCD panel or viewfinder display, turn the dial to set the desired setting. • Use the dial this way to set the shutter speed and aperture - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 28
Main dial button button LCD monitor Playback menu Shooting menu Tab button Cross keys < > Set-up 1 menu Set-up 2 menu Menu items Menu settings • Even while the menu is displayed, you can immediately go back to shooting mode by pressing the shutter button halfway. • When a Basic - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 29
Menu Operations Setting Procedure Display the menu. 1 • Press the button to display the menu. To turn off the menu, press the button again. Select a tab. 2 • Press the button to select a tab. • When a tab is highlighted, you can - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 30
Auto reset Initializes and erases card (Set-up 2) Language Video system Communication Clear all camera settings Sensor clean. Firmware Ver. 12 languages NTSC PAL Normal PTP Resets camera settings to defaults Enables sensor cleaning Displays version info Languages provided: English, German - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 31
to review and select recorded images and set various menu settings. The LCD monitor cannot be used as a viewfinder to shoot. •• The LCD monitor's brightness can be adjusted with the menu's [LCD Brightness] setting (∆). Reverting to the Default Settings Select [Clear all camera settings]. 1 Select - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 32
[Date/ Time], then press . s The Date/Time setting screen will appear. Set the date and time. 2 • Press the keys to set the digits, then press . • The selection will then shift to the next item. Set the date display format. 3 • Press the keys to set the desired date format to [mm/dd/yy - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 33
Date/Time Battery The date/time battery maintains the camera's date and time. The battery's service life is about 5 years. When the date/time battery's power is low, " " will appear on the LCD panel. Replace the battery with a new CR2016 lithium battery as described below. The date/time setting will - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 34
If possible, you should have it cleaned by a Canon Service Center. While you clean the image sensor, the camera must be turned on. Use the AC Adapter Kit ACK-E2 (optional accessory, see page 128) or a battery. If you use a battery, make sure the battery level is sufficient. Before cleaning the image - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 35
cleaning. 5 • Set the Power switch to . s The camera will turn off and the shutter will close. The mirror will also go down. • Set the Power switch the battery is exhausted, the beeper will sound and the icon will blink on the LCD panel. Set the Power switch to and replace the battery. - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 36
the knob left or right so that the AF points in the viewfinder look sharp. • The illustration shows the knob at the standard setting (-1 dpt). If the camera's dioptric adjustment still cannot provide a clear viewfinder image, using Dioptric Adjustment Lens E (10 types) is recommended. Holding the - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 37
point and shoot. In addition, to help prevent mistakes caused by operating the camera improperly, the buttons do not operate so there is no need to worry about accidental errors. Set the Mode Dial to < Y> or . asic Zone • The shooting procedure is the same - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 38
active AF point will flash in red, the beeper will sound, and the focus confirmation light on the bottom right of the viewfinder will light. 4 Check the exposure setting. s The shutter speed and aperture value will be set automatically and displayed in the viewfinder and on the LCD panel. 38 - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 39
press the shutter button fully. s The captured image will be displayed for about 2 sec. on the LCD monitor ( flash from popping up, < > will blink on the LCD panel. Fix this by setting the power switch to off and on. • Using a non-Canon EF lens with an EOS camera may not result in proper camera - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 40
Modes Select a shooting mode to suit the target subject, and the camera will be set to obtain the best results. For the functions available in the Basic Zone the telephoto end of a zoom lens. • For better close-ups, an EOS-dedicated macro lens and Macro Ring Lite (both optional) are recommended. - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 41
to keep still even after the flash fires. S Flash off You can disable the flash when you do not want it to fire. • The built-in flash or any external Speedlite will not fire. In the mode, use a tripod to prevent camera shake. In the or mode, use a tripod if the shutter speed display - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 42
the keys to select [Review], then press . Set the Review setting. 2 • Press the keys to select the desired setting, then press . 3 Shoot. s The captured image will be displayed on the LCD monitor. Review [On] setting Review [On (Info)] setting (p.87) Histogram Shooting information - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 43
to select [Review time], then press . Set the Review time setting. 2 • Press the keys to select the desired setting, then press . • The [Hold] setting keeps displaying the image until you press the shutter button halfway. However, if auto power off has been set, the camera will turn off - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 44
lamp stays lit. s During the self-timer operation, the LCD panel counts down the seconds until the image is captured. Do not stand in front of the camera when you press the shutter button to start the self-timer. Doing so prevents the camera from focusing on the subject. To cancel the self-timer - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 45
camera. Press the button (∫). 1 • Press the button so that appears on the LCD panel. Shoot. 2 • Point the signal transmitter toward the camera setting. • Certain types of fluorescent light may cause camera misoperation. During wireless remote control, try to keep the camera away - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 46
Using the Eyepiece Cover During self-timer or remote control operation when your eye does not cover the viewfinder eyepiece, stray light may enter the eyepiece and affect the exposure when the image is captured. To prevent this, use the eyepiece cover (attached to the neck strap) to cover the - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 47
chapter explains the settings for shooting digital images: Image-recording quality, ISO speed, white balance, processing parameters, file numbering, and auto rotation. For Basic Zone modes, only the image-recording quality (except ), file numbering, auto rotation, and camera setting checking will - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 48
settings other than . Images captured in the format must later be processed by a personal computer. For example, when [Large a] is selected, the LCD panel will display can use the bundled software to obtain the desired effect. • RAW images cannot be printed directly from the camera. • The - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 49
CF card's maximum capacity are based on Canon's testing standards (at ISO 100 with [Parameter 1] set). The actual image file size and the CF card's maximum capacity varies depending on the subject, shooting mode, ISO speed, and processing parameters. • On the LCD panel, you can check how many more - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 50
the (ß) button. (∫) s The current ISO speed will be displayed on the LCD panel. Set the ISO speed. 2• While looking at the LCD panel, turn the dial to set the desired ISO speed. • To return to shooting, press the shutter button halfway. • The higher the ISO speed and the higher the ambient - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 51
setting. 2 • While looking at the LCD panel, turn the dial to select the desired white balance setting. • To return to shooting, press the shutter button halfway. Auto Daylight Shade Cloudy, twilight, sunset Custom (p.52) Flash . With a digital camera's white balance setting, you can - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 52
. Shoot a white object. 1 • The plain, white object should fill the viewfinder center. • Set the lens focus mode switch to , then focus manually (p.64). Set any white balance setting. (p.51) •• Shoot the white object so that a standard exposure is obtained. If it is underexposed or overexposed - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 53
used by film cameras. 1 Set the image-recording quality to any setting except [RAW]. Set the bracketing amount. 3 • Press the keys to select the bracketing amount, then press . s The mark for the selected white balance level will blink. s The number of remaining shots displayed on the LCD - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 54
recorded for each shot. Therefore, a total of nine images will be recorded on the CF card. Canceling White Balance Auto Bracketing • Follow steps 2 and 3 to set the bracketing amount to < >, then press . • You can also set the Power switch to to cancel white balance bracketing. 54 - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 55
to select the desired parameter, then press . (The respective settings are shown below.) Processing Parameters Parameter Parameter 1 Parameter 2 will be more subdued compared to Parameter 1. Adobe RGB Set 1, 2, 3 Setting This is mainly used for commercial printing. Since the image will look - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 56
you capture can be processed automatically by the camera in accordance with the parameter settings you set (five settings each for [Contrast], [Sharpness], [Saturation], and [Color tone]). You can register and save up to three sets of processing parameters. Parameter Contrast Sharpness Saturation - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 57
Return to the [Parameters] menu. 6 • Press the button twice to return to step 1. Then press < p>. Select the desired Set Number. 7 • Press the keys to select [Set 1], [Set 2], or [Set 3], then press . [Parameter 1] sets the contrast, sharpness, and color saturation by +1 stop. [Parameter - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 58
the frame number of film images. The automatic file numbering method can be set to [Continuous] or [Auto reset]. Select [File numbering]. 1 Select the full] will appear on the LCD monitor. Then if file No. 9999 is created, " " will be displayed on the LCD panel and in the viewfinder. Replace - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 59
keys to select [Auto rotate], then press . Set the Auto rotate setting. 2 • Press the keys to select [On], then press . Take a vertical shot. 3 • For the image review right after image capture, the image will not be displayed vertically on the LCD monitor. Playback the image. 4 • Press the - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 60
. • Press the button again to clear the LCD monitor. Camera Setting Information Date/time (p.32) AEB amount (p.76) WB-BKT amount (p.53) Processing parameter setting (p.55) Image review (p.42) Image review time (p.43) Auto rotate (p.59) ISO speed (p.50) CF card remaining capacity Auto power off - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 61
4 Advanced Operations With Creative Zone modes, you can set the desired shutter speed or aperture value to obtain the exposure you want. You take control of the camera. Creativ e Zone • Depth-of-field preview, exposure compensation, AEB, AE lock, bulb, and white balance bracketing are possible - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 62
for focusing. The AF point can be selected automatically by the camera or manually by you. In the Basic Zone modes and mode, the LCD panel or in the viewfinder and turn the dial to select the desired AF point. • After selecting the AF point, press the shutter button halfway. The camera will - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 63
shot. This is called "focus lock." 1 Set the camera to a Creative Zone mode. • Set a Creative Zone mode except . 2 Select the desired AF point. 3 Aim the AF point over the subject and press the shutter button halfway to focus. 4 Keep pressing the shutter button halfway and recompose the image as - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 64
and focus manually. Manual Focusing 1 Set the lens focus mode switch to < MF >. Focusing ring Focus on the subject. 2 • Focus by turning the lens focusing ring until the subject is in focus in the viewfinder. • If you press the shutter button halfway during manual focusing, the active AF - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 65
mode can be set to single or camera. • If you press the shutter button halfway before all the images in the internal memory are transferred to the CF card (while the access lamp blinks), the image transfer to the CF card will stop temporarily. • If " " is displayed in the viewfinder and on the LCD - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 66
aim any AF point over the subject. Then press the shutter button halfway. Shutter speed Aperture value 3 Check the display. s The shutter speed and aperture value will be set automatically and displayed in the viewfinder and on the LCD panel. • A correct exposure will be obtained as long as the - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 67
the shutter speed and aperture value combination (program) set by the camera while maintaining the same exposure value. This is called shifting the program. • To do this, press the shutter button down halfway, then turn the dial until the shutter speed or aperture value you want is displayed - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 68
speed 1 Set the Mode Dial to . Select the desired shutter speed. 2 • Look at the LCD panel and turn the dial to set the desired shutter speed. Focus on the subject. 3 • Press the shutter button down halfway. s The aperture value is determined automatically. 4 Check the viewfinder display - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 69
it indicates overexposure. Turn the dial to set a faster shutter speed until the blinking stops. Or decrease the ISO speed. Shutter Speed Display The shutter speeds from " " to " " indicate the denominator of the fractional shutter speed. For example, " " indicates 1/125 sec. Also, " " indicates - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 70
value. 2 • Look at the LCD panel and turn the dial to set the desired aperture value. Focus on the subject. 3 • Press the shutter button down halfway. s The shutter speed is determined automatically. 4 Check the viewfinder display and shoot. • If the shutter speed is not blinking, the exposure - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 71
the blinking stops. Or increase the ISO speed. • If the " " shutter speed blinks, it indicates overexposure. Turn the dial to set a smaller aperture value (larger f/number) until the blinking stops. Or decrease the ISO speed. Aperture Value Display The larger the f/number, the smaller the - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 72
the viewfinder or use a handheld exposure meter. This method is called manual exposure. ∗f stands for manual. 1 Set the Mode Dial to . Select the desired shutter speed. 2• Turn the dial to set the desired shutter speed. Select the desired aperture value. 3 • Hold down the button and turn - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 73
f Manual Exposure Determine the exposure. 5 • Check the exposure level and set the desired shutter speed and aperture value. 6 Shoot. If the exposure level mark blinks at the or level, it indicates that the difference between the standard exposure exceeds +/-2 stops. 73 - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 74
photos and landscapes. The camera uses the seven AF points to detect the nearest and farthest subjects to be in focus. ∗Q stands for Auto-depth of field. 1 Set the shutter speed and aperture value. If the camera sets a slow shutter speed, hold the camera steady or use a tripod. • If you use a flash, - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 75
be canceled automatically. • If the standard exposure setting is 1/125 sec. and f/5.6, setting the exposure compensation amount to plus or minus one stop will be the same as setting the shutter speed or aperture value as follows: -1 stop ← 0 → +1 stop Shutter speed 250 ← 125 → 60 Aperture value - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 76
tab. •• Press the keys to select [AEB], then press . Set the AEB amount. 2 • Press the keys to set the desired AEB amount, then press < p>. AEB range s The < L> and AEB level will appear on the LCD panel. standard exposure decreased exposure increased exposure 76 3 Shoot. s The - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 77
mode is set to single image, you must press the shutter button three times. • If the self-timer/remote control has been set, the three set the AEB amount to < >. • AEB will also be canceled automatically if you turn the Power switch to , change lenses, have flash-ready, replace the battery - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 78
. s The exposure setting will be displayed in the viewfinder. 2 Press the button. (˜) s The < j> icon will light in the viewfinder to indicate that the exposure setting < j> button, it locks the current exposure setting. AE lock indicator Compose the shot and shoot. - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 79
is open during the time you keep pressing the shutter button fully. Bulb is useful when a long exposure is necessary for capturing night scenes, fireworks, the night sky, etc. 1 Set the Mode Dial to . Set the shutter speed to " ". 2 • Look at the LCD panel and turn the dial to select - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 80
in < Y> (Full Auto) mode. R Select mode to manually set a shutter speed slower than 1/200 second. The camera then automatically sets the flash aperture value to provide the proper exposure for your shutter speed. E Select mode to manually set the aperture value. Against dark backgrounds such - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 81
m (2.3-21.6 ft) Approx. 0.7-14.9 m (2.3-48.9 ft) Approx. 0.7-9.2 m (2.3-30.2 ft) Flash Sync Speed and Aperture Settings Mode T R E W Q Shutter speed setting Auto (1/60 to 1/200 sec.) Manual (30 to 1/200 sec.) Auto (30 to 1/200 sec.) Manual (Bulb to 1/200 sec.) Auto (1/60 to 1/200 sec.) Aperture - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 82
"Red eye" happens when the light from the flash reflects off the retina of the eyes. The camera's red-eye reduction feature turns on the red-eye ], then press . Set the red-eye reduction. 2 • Press the keys to select [On], then press . • When you press the shutter button down halfway, the - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 83
> icon is lit. 1 • Press the button to pop-up the built-in flash. • In the viewfinder, check that the icon is lit. Focus on the subject. 2 • Press the shutter button halfway. Keep pressing the shutter button halfway until step 4. Press the < j> button. (√) 3 • Aim the viewfinder center over - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 84
conditions, camera orientation (horizontal or vertical), etc., the camera sets the proper exposure. Partial metering This is set automatically the LCD panel, press the button. To turn off the illumination, press the button again. The illumination will turn off when you press the shutter button - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 85
chapter explains how to view and erase images and how to connect the camera to a TV monitor. Images not taken with the camera: The camera might not be able to properly display images captured with a different camera or edited with a personal computer for image processing or changing the file name - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 86
with the newest one. • Press the key to view images starting with the oldest one. • To quit the playback, press the button. The LCD monitor will turn off. In any image display mode, you can turn the dial to view another image. 4 Image with Shooting Information While an image is - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 87
File No. Image Flash exposure compensation amount Aperture value Shutter speed Images recorded / Total images recorded Image-recording quality Image protect Exposure compensation amount Histogram Metering mode Shooting mode ISO speed WB-BKT Shooting time White balance Audio note (The camera has no - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 88
Image Playback ˆ Index Display Nine thumbnail images are displayed on one screen. 1 Set the camera to the playback mode. • Press the button. s The last captured image will appear on the LCD monitor. Display the index. 2 • Press the button. s The selected thumbnail will be highlighted with a - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 89
7/ø Magnified View The selected image can be magnified by 1.5x to 10x on the LCD monitor. 1 Display the image to be magnified. • Display the image in the single-image or image information display mode. Magnified portion Magnify the image. 2 • Press the button. s The center of the image - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 90
, image with shooting information, index, or magnified image is displayed, you can jump images ahead or back. Set the camera for playback. 1 • Display a single image, image with shooting information, index, or magnified image. Set jump display. 2 • Press the button. s The jump bar will appear at - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 91
select [Auto Play]. Start the auto play. 2 • Press . s After [Loading image...] is displayed for a few seconds, auto play will start. • To pause the auto play, press < play, auto power off will not work. •• The display time may vary depending on the image. • If you press the button during - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 92
can rotate an image 90° or 270˚ clockwise. This allows you to display images with the correct orientation. Select [Rotate]. 1 Select the tab. image rotation, press the button. The menu will reappear. • If you have set [Auto rotate] to [On] (p.59) before taking the vertical shots, you need - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 93
's power switch to . 4 Press the button. s The image will appear on the TV set. (The camera's LCD monitor will not display anything.) • When you finish, set the Power switch to , turn the TV off, then disconnect the video cable. • While looking at the TV monitor, you can view images - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 94
button. The menu will reappear. • Once an image is protected, it cannot be removed by the camera's Erase function. To erase a protected image, you must first remove the protection. • If you . • Image protection can also be set in the image information, magnified view, and index display modes. 94 - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 95
images from being erased accidentally, protect it. Erasing a Single Image 1 Set the playback mode and select the image to be erased. Press the < ]> button. •• Press the keys to select the image to be erased. Display the erase menu. 2 • Press the button. s The erase menu will appear - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 96
9 Erasing an Image Erasing All Images Set the camera for playback. 1 • Press the button. Display the erase menu. 2 • Press the button. s The erase menu will appear at the bottom of the screen. Select [All...]. 3 • Press the keys to select [All...], - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 97
the menu will reappear. • A non-Canon CF card or a CF card formatted with another camera or personal computer might not work with the camera. In such a case, format the CF card with the camera first. Then it might work with the camera. • The CF card's capacity displayed on the formatting screen may - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 98
Formatting the CF Card About the " " Error Message If " " (CF error) is displayed on the LCD panel, it indicates a problem with the CF card that is preventing the image data from being recorded or read. Use another CF card instead. Or, if you have a commercially- - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 99
6 Direct Printing from the Camera By using the dedicated cable to connect the camera to a Canon printer (optional) compatible with direct printing, you can easily print images directly from the camera. The direct printing operation is all done with the camera. 99 - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 100
Printer 1 Turn the Power switch to . Set up the printer. 2 • For details, refer to the printer's manual. Connect the camera to the printer. 3 • For information on which cable to use and how to connect it to the printer, refer to the printer's instruction booklet. • When connecting the cable plug - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 101
s The image will be displayed, and the or icon will appear on the upper left. Indicates that a card photo printer is connected. BJ printer-connected icon • For direct printing, using AC Adapter Kit ACK-E2 (optional) to power the camera is recommended. • If a battery pack will be used to - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 102
be printed directly from the camera. Connected printer icon Select the image to be printed. 1 • Check that the or icon is displayed on the upper left of the LCD monitor. • Press the keys to select the image to be printed. 2 Press . s The print setting screen will appear. Print - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 103
for [Borders], [Date], and the BJ printer's paper size. • For the setting procedure, see "Setting the Printing Style" on the next page. Print the image. 4 • Press the keys to select [PRINT], then press . s Printing will start. • When the printing is - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 104
the keys to select the option, then press . s The available settings will be displayed. Style setting screen BJ printer Card photo printer With BJ printers, [Paper] must be set to the paper size used. •• With card photo printers, [Image] will appear instead of [Paper]. With the [Image - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 105
will appear on the print. • The date will appear on the lower right of the image. •• If you use a card photo printer and selected [Multiple], you will not be able to set [Borders] and [Date]. The print will be borderless without any date imprinted. The image will also be trimmed on all - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 106
can trim the image and print only the trimmed portion. Before starting, you must first set the [Style] settings. If you change the [Style]/[Borders] after setting the trimming, the trimming setting will be lost. Select [Trimming]. 1 • Press the keys to select [Trimming], then press . s The - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 107
then change the [Style]/[Borders] setting, the [Readjust trimming] message will appear. Set [Trimming] again or change back the [Borders] setting. Otherwise, the trimming will not take effect for the printed image. • When setting the [Trimming], look at the camera's LCD monitor. If you look at a TV - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 108
displayed on the LCD monitor, press . s The printing will stop. s If the confirmation dialog appears, press the keys to [OK], then press . When Stopping the Printing With a card photo . • If only [Stop] is displayed, press . After correcting the problem, start over again to print. 108 - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 109
DPOF-compatible printer or photo lab. DPOF DPOF (Digital Print Order Format) is a standard for digital cameras to record the image selections, quantity of prints, and other print settings on a CF card or other recording media. Print settings with a DPOF-compatible digital camera enable the following - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 110
inserting the date, and inserting the image file No. The printing options will apply to all the images selected for printing. (They cannot be set differently for each image.) For printing, you can either select images individually or select all the images. If you select individual images first and - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 111
Press the keys to select the option, then press . s The set up screen will appear. [Print Type] [Date] [File No.] Select the desired setting. 4 • Press the keys to select the desired setting, then press . 5 Exit the set up screen. • Press the button. The print order screen will - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 112
might not come out in the final prints. For details, refer to your printer's instructions or consult your photo lab. • Do not set DPOF specifications in a CF card containing images taken with a different camera. Doing so may overwrite any existing DPOF specifications. Also, certain types of images - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 113
Print Order Selecting Individual Images When the print type is [Standard] or [Both], you can set the number of copies to be printed for each standard-type print. If [Index] is set, you can either include or not include the image to the index print. Select [Order]. 1 • Press the keys to select [ - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 114
on the [Print Type] explained in Indication when [Standard] "Printing Options" on page 110. and [Both] are set. Press the keys to set the number of copies from 1 to 99. Indication when [Index] is set. If you want to include the image to the index print, press the keys to checkmark the - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 115
you select [Cancel], the print order screen will reappear. Exit the Print Order screen. 3 • On the Print Order screen, press the button to save the settings to the CF card. The screen will then return to the main menu. The printing will start with the oldest image. •• Up to 998 images - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 116
Select [Print]. 3 • Press the keys to select [Print], then press . • [Print] will be displayed only if the camera is connected to the printer and printing is possible. 4 Printing style settings Set the printing style. q Press the keys to select [Style], then press . The [Style] screen - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 117
displayed on the upper left. • Press the keys to select [OK], then press . s The printing will start. • When the printing ends, the screen will return to step 3. If you set images with a BJ printer, refer to the printer's instruction booklet. • On standard prints, the date is imprinted - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 118
displayed on the LCD monitor, press . s The printing will stop. s When the confirmation dialog appears, press the keys to select [OK], then press . Stopping the Printing With a card photo • If only [Stop] is displayed, press . After correcting the problem, start over again to print. 118 - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 119
MEMO 119 - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 120
MEMO 120 - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 121
8 Reference This section will help you understand your camera better. It covers basic shooting concepts, camera specifications, system accessories, and other reference information. 121 - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 122
AF Auto point selection Manual Program shift Exposure Exposure compensation AEB AE lock Depth-of-field preview Evaluative Partial Centerweighted average Drive Single Continuous Auto Manual Flash off Red-eye reduction FE lock Camera setting reset Image sensor cleaning Metering - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 123
focus is achieved. moving subject, and When focus is achieved, it the exposure is set is locked. With evaluative when the shot is metering, the exposure taken. setting is also locked. (The exposure setting is stored in memory before the shot is taken.) AI Focus AF Automatically switches between - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 124
18) • The battery's service life has expired. s Replace the battery with a new one. "The camera turns off by itself." • Auto power off is in effect. sSet the Power switch to again or set auto power off to [Off]. (p.30) "Only the icon is displayed on the LCD panel." • The battery has almost - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 125
is set to or . s Set the lens focus mode switch to . (p.23) • Camera shake occured when you pressed the shutter button. s To prevent camera shake, hold the camera still and press the shutter button gently. (p.26, 36) "The CF card cannot be used." • [ ** ] is displayed on the LCD panel - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 126
Troubleshooting Guide Image Review "The image cannot be erased." • The image is protected. s Cancel the protection first. (p.94) "The date and time is wrong." • The correct date and time has not been set. s Set the correct date and time. (p.32) "No image appears on the TV screen." • Video cable - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 127
displayed on the LCD panel. Follow the instruction below according to the error code. If the same error occurs often, something is probably wrong with the camera. Jot down the "xx" error code and take your camera to the nearest Canon Service obstructed the built-in flash's pop-up operation. Turn < - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 128
Grip BG-E1 Accommodates two Battery Pack BP-511 or BP512's. Equipped with a vertical-grip shutter button, main dial, AE lock/FE lock button, AF point selector, and exposure compensation/aperture setting button. Semi-Hard Case EH-16L Dedicated case to protect the camera. It can accommodate the - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 129
to the camera's hot shoe. It provides high-output flash and features like high-speed sync (FP flash) and FE lock. Flash shooting is as easy as normal AE shooting. Macro Flash The EX-series Macro Lites are ideal for macro flash shooting. You can fire only one flash tube or set a flash ratio to - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 130
Macro Twin Lite MR-14EX MT-24EX E-series Dioptric Adjustment Lenses Bundled Accessories Eyecup Ef Angle Finder C Neck Strap EW-100DBII Semi-hard Case EH-16L Battery Pack BP-511 Date / time CR2016 lithium battery Battery Grip BG-E1 Battery Charger CB-5L AC Adapter Kit ACK-E2 EF-S lens - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 131
reader PC card adapter System Map • EOS DIGITAL Solution Disk • Adobe Photoshop Elements Disk Interface cable IFC-300PCU Video Cable VC-100 PC card slot USB port Computer Windows XP (Home Edition / Professional) Windows 2000 Professional Windows ME Windows 98 Second Edition Mac OS 9.0-9.2 Mac - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 132
lenses: Lens mount: Digital, single-lens reflex, AF/AE camera with built-in flash Type I and II CF card 22.7 mm x 15.1 mm Canon EF lenses Processing parameters: Interface: JPEG supporting Design rule for Camera File system (except when Adobe RGB is set) and RAW JPEG and RAW (12-bit) (1) Large/Fine - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 133
shutter speed, aperture value, manual exposure, AE lock, exposure level), flash information (flash ready, red-eye reduction lamp on, high-speed approx. 9% of viewfinder at center) • Centerweighted average metering (Set automatically in manual exposure mode) Metering range: EV 1-20 (at 20˚C/68 - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 134
Speedlite EOS-dedicated Speedlites: E-TTL autoflash set with EX-series Speedlites • Drive System Drive modes: Single, continuous, Self-timer/Remote control Continuous shooting speed: Approx. 2.5 fps (at 1/250 sec. or faster speeds) Max. burst during continuous shooting: 4 shots • LCD Monitor - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 135
images • Menus Menu categories: LCD monitor language: Shooting menu, Playback menu Setup menu 12 languages provided (English, German, French, Dutch, Danish, Finnish, Italian, Norwegian, Swedish, Spanish, Simplified Chinese, and Japanese.) • Power Source Battery: One Battery Pack BP-511/BP-512 - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 136
: 85% or lower • Battery Charger CB-5L Compatible batteries: Battery Pack BP-511/BP-512 Battery mount: 1 Power cord length : LP814 • All the specifications above are based on Canon's testing standards. • The camera's specifications and physical appearance are subject to change without notice - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 137
Digital Camera Model DS6041 not installed and used in accordance with the instructions, may cause harmful interference to radio communications. the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A. Inc. One Canon Plaza - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 138
22 Accessories 128 Battery 18 Battery Charger 15 Battery Level Icons 20 Battery Life 21 Bulb Exposures 79 C CF Card 9, 24, 129 CF card formatting 97 Changing the Review Time ......... 43 Checking Camera Settings 46 F FE Lock 83 File Numbering 58 Flash off 41 Focus lock 63 Full pressing - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 139
Index Image-Recording Quality 48 Index Display 88 ISO Speed 50 L Landscape 40 Language 30 LCD Monitor 9, 31 LCD Panel 9, 12 LCD Panel Illumination 84 Lens 23 M Magnified View 89 Main dial 16, 27 Manual Focusing 64 Max. Capacity 49 Menu Settings 28 Metering Modes 84 Mode Dial 14 N - Canon Digital Rebel | EOS DIGITAL REBEL/EOS 300D DIGITAL Instruction Manual - Page 140
2-chome, Minato-ku, Tokyo 108-8011, Japan This Instruction Manual booklet is current as of August 2003. For information on using the camera with system accessories introduced after this date, contact your nearest Canon Service Center. CT1-1244-001 0000Ni0.0 © CANON INC. 2003 PRINTED IN TAIWAN
E
INSTRUCTION MANUAL
E
INSTRUCTION MANUAL