Canon EF 100mm f/2.8L Macro IS USM EF100mm F2.8L MACRO IS USM Instruction Manu - Page 14
Using the Tripod Mount - tripod ring
View all Canon EF 100mm f/2.8L Macro IS USM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
10. Using the Tripod Mount (Sold separately) Adjusting the Revolving Mount This lens can be used with the D (B) tripod mount ring, sold separately. You can loosen the orientation lock-knob on the tripod mount to allow it to rotate as needed to fit a particular camera model for switching between vertical and horizontal positions. Detaching Use the following procedures to remove and attach the tripod mount. Turn the locking knob counterclockwise until it becomes loose (about 3 turns), and pull the knob in the direction of the arrow to release the collar. With the collar open, remove the tripod mount. To install, while pulling the locking knob, bring the collar to the original position, and tighten the locking knob securely. Depending on the EOS camera model, if a battery pack or vertical grip is attached, the tripod mount may bump into it. If that is the case, remove the battery pack/vertical grip or the tripod mount. The tripod collar can be attached to or detached from the lens while the lens is attached to the camera. ENG-13