Canon EF 70-200mm f/2.8L IS III USM EF70-200mm f/2.8L IS III USM Instructions - Page 15
● Attaching, ● Removing - lens mark 3
![]() |
View all Canon EF 70-200mm f/2.8L IS III USM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
10. Hood The ET-87 hood cuts out unwanted light and protects the front of the lens from rain, snow, and dust. Attachment position mark Red dot Red dot Red dot Attachment position mark Stop position mark ● Attaching Align the red attachment position mark on the hood with the red dot on the front of the lens, and then rotate the hood in the direction of the arrow until you hear a click. Button ● Removing Keep your finger pressed down on the button located on the side of the hood, and then rotate the hood in the direction of the arrow until the attachment position mark on the hood is aligned with the red dot on the front of the lens to detach it. The hood can be reverse-mounted on the lens for storage. ●● If the hood is not attached properly, vignetting (darkening of the perimeter of the picture) may occur. ●● Grasp and rotate the base of the hood when attaching and detaching it. There are cases in which it may become deformed if the hood is rotated with it grasped near to the rim. ENG-14
![](/manual_guide/products/canon-ef-70200mm-f28l-iii-usm-ef70200mm-f28l-iii-usm-instructions-cb729fe/15.png)