Canon EF 8-15mm f/4L Fisheye USM EF8-15mm f/4L Fisheye USM Instruction Manual - Page 6
Mounting and Detaching the Lens
View all Canon EF 8-15mm f/4L Fisheye USM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
1. Mounting and Detaching the Lens See your camera's instructions for instructions on mounting and detaching the lens. The lens mount has a rubber ring for enhanced water- and dust-resistance. The rubber ring may cause slight abrasions around the camera's lens mount, but this will not cause any problems. If the rubber ring becomes worn, it is replaceable by a Canon Service Center at cost. • After detaching the lens, please attach the lens hood and lens cap and place the lens with the rear end up to prevent the electrical contacts and lens surface from getting scratched. • If the contacts get soiled, scratched, or have fingerprints on them, corrosion or faulty connections can result. The camera and lens may not operate properly. • If the contacts get soiled or have fingerprints on them, clean them with a soft cloth. • If you remove the lens, cover it with the dust cap. To attach it properly, align the lens mount index and the K index of the dust cap as shown in the diagram, and turn clockwise. To remove it, reverse the order. a Please be careful when laying the lens sideways while the lens hood and the lens cap are attached. The lens may roll and fall, resulting in injury. ENG-5