Canon EF-M 11-22mm f/4-5.6 IS STM EF-M11-22mm f/4-5 6 IS STM Instructions - Page 1
Canon EF-M 11-22mm f/4-5.6 IS STM Manual
View all Canon EF-M 11-22mm f/4-5.6 IS STM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
CT1-8587-001 ENG EF-M LENS Instructions EF-M11-22mm f/4-5.6 IS STM ᶋ ᶌ ᶃ ᶄ ᶊ ᶉ ᶈ Safety Precautions 1. Mounting and Detaching the Lens ❶ See your camera's instructions for details on mounting and • Do not look at the sun or a bright light source through detaching the lens. the lens. Doing so could result in vision loss or blindness. • Whether it is attached to the camera or not, do not leave the lens under the sun without the lens cap attached. This is to prevent the lens from concentrating the • After detaching the lens, place the lens with the rear end up to prevent the lens surface and contacts from getting scratched. (fig.❶) sun's rays, which could cause a fire. • If the contacts get soiled, scratched, or have fingerprints on them, corrosion or faulty connections can result. The Handling Cautions • If the lens is taken from a cold environment into a warm one, condensation may develop on the lens surface and internal parts. To prevent condensation in this case, first put the lens into an airtight plastic bag before taking it from a cold to warm environment. Then take out the lens after it has warmed gradually. Do the same when taking the camera and lens may not operate properly. • If the contacts get soiled or have fingerprints on them, clean them with a soft cloth. • If you remove the lens, cover it with the dust cap. To attach it properly, align the lens mount index and the index of the dust cap as shown in the diagram, and turn clockwise. (fig.❷) To remove it, reverse the order. ❷ ᶅ lens from a warm environment into a cold one. • Do not leave the lens in excessive heat such as in a car in direct sunlight. High temperatures can cause the lens to malfunction. • Please also refer to the handling cautions found in your camera's instructions. 2. Shooting Preparations and Retracting Lens Shooting Preparations: (Set the lens to the shooting position) Align the lens retract position index and zoom position index. Maintain pressure on the lens-retraction switch in the [▲] ᶆ ᶇ Conventions used in this instruction direction. Slightly rotate the zoom ring in the direction of the white arrow to release the lens-retraction switch and rotate Warning to prevent lens or camera malfunction or further until it clicks. The lens now ready for shooting. (The no. Nomenclature damage. 11 pointing line in the focal length indicator which shows above ① Focusing ring Supplementary notes on using the lens and taking or to the left of the zoom position index extension line.) (fig.❸) ② Hood mount ③ Filter Mounting Thread ④ Lens mount index pictures. This device complies with Part 15 of the FCC Rules. Operation Retracting Lens: Maintain pressure on the lens-retraction switch in the [▲] direction. Rotate the zoom ring in the opposite direction to the ❸ ⑤ Contacts is subject to the following two conditions: (1) This device may white arrow. Align the lens retract position index and the zoom ⑥ Zoom position index not cause harmful interference, and (2) this device must accept position index. Release the lens-retraction switch to retract the ⑦ Lens retracted position index any interference received, including interference that may lens. ⑧ Zoom ring cause undesired operation. Do not forcibly rotate the zoom ring if its movement ⑨ Focal length indicator Do not make any changes or modifications to the equipment becomes constricted at the retractable end or the wide ⑩ Lens-retraction switch unless otherwise specified in the instructions. If such changes end, as there is a danger of damaging the lens-retraction or modifications should be made, you could be required to stop switch mechanism. Thank you for purchasing a Canon product. operation of the equipment. The Canon EF-M11-22mm f/4-5.6 IS STM is a 2x wide- This equipment has been tested and found to comply with 3. Zooming angle zoom lens developed for interchangeable-lens digital the limits for a class B digital device, pursuant to part 15 Turn the lens' zoom ring to adjust the size of the photo field or cameras compatible with EF-M lenses*. of the FCC Rules. These limits are designed to provide subject. (fig.❹) * Only the following cameras are compatible with EF-M lenses (as of June 2013): reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and • For wide shots, turn the zoom ring toward the wide end. • For close-ups, turn the zoom ring toward the telephoto end. ❹ EOS M used in accordance with the instructions, may cause harmful • Be sure to finish zooming before focusing. Zooming after interference to radio communications. focusing can affect the focus. When attaching this lens to a Canon EOS M camera with However, there is no guarantee that interference will not occur • Blurring may temporarily occur if the zoom ring is quickly firmware earlier than version 2.0.0, there is a slight chance in a particular installation. If this equipment does cause harmful rotated. that the camera will not operate properly during shooting. interference to radio or television reception, which can be determined • Zooming during still image exposure will result in delayed Therefore, please be sure to update the EOS M firmware to by turning the equipment off and on, the user is encouraged to try to focus. This causes any streaks of light that are captured version 2.0.0 or later (For information about updating your correct the interference by one or more of the following measures: during exposure to be blurred. camera's firmware, please check the Canon website). • Reorient or relocate the receiving antenna. • "IS" stands for Image Stabilizer. • "STM" stands for stepping motor. • Increase the separation between the equipment and receiver. • Consult the dealer or an experienced radio/TV technician for help. This Class B digital apparatus complies with Canadian ICES- 003. Wide end Telephoto end Zoom ring ENG-1