Canon EF-S 55-250mm f/4-5.6 IS EF-S55-250mm F4-5.6 IS Instruction Manual - Page 5

Mounting and Detaching the Lens, Setting the Focus Mode - 4 lens

Page 5 highlights

1 Mounting and Detaching the Lens See your camera's instructions for details on mounting and detaching the lens. 2 Setting the Focus Mode ¡After detaching the lens, place the lens with the rear end up to prevent the lens surface and electrical contacts from getting scratched. ¡If the contacts get soiled, scratched, or have fingerprints on them, corrosion or faulty connections can result. The camera and lens may not operate properly. ¡If the contacts get soiled or have fingerprints on them, clean them with a soft cloth. ¡If you remove the lens, cover it with the dust cap. To attach it properly, align the lens mount index and the ¢ index of the dust cap as shown in the diagram, and turn clockwise. To remove it, reverse the order. To shoot in autofocus mode, set the focus mode switch to AF. To use only manual focusing, set the focus mode switch to MF, and focus by turning the focusing ring. ¡Do not touch the rotating parts of the lens while autofocus is active. ¡Do not adjust focus manually when the focus mode switch is set to AF. ENG-4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

ENG-4
1
Mounting and Detaching the Lens
See your camera’s instructions for details on
mounting and detaching the lens.
¡
After detaching the lens, place the lens with the
rear end up to prevent the lens surface and
electrical contacts from getting scratched.
¡
If the contacts get soiled, scratched, or have
fingerprints on them, corrosion or faulty
connections can result. The camera and lens
may not operate properly.
¡
If the contacts get soiled or have fingerprints on
them, clean them with a soft cloth.
¡
If you remove the lens, cover it with the dust
cap. To attach it properly, align the lens mount
index and the
¢
index of the dust cap as shown
in the diagram, and turn clockwise. To remove
it, reverse the order.
2
Setting the Focus Mode
To shoot in autofocus mode, set the focus mode
switch to AF.
To use only manual focusing, set the focus mode
switch to MF, and focus by turning the focusing
ring.
¡
Do not touch the rotating parts of the lens while
autofocus is active.
¡
Do not adjust focus manually when the focus
mode switch is set to AF.