Canon EOS-1Ds Mark II EOS Utility for Windows Instruction Manual (for EOS DIGI - Page 8
Connecting the 1D Mk II N, 1Ds Mk II, 1D Mk II and a Computer
View all Canon EOS-1Ds Mark II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Connecting the 1D Mk II N, 1Ds Mk II, 1D Mk II and a Computer Attach the cable protector to the IEEE1394 interface cable (IFC-200D4) provided with your camera, and then connect the camera and computer. 1 Connect the plug of the cable with the < > mark into the computer's IEEE1394 port. O For the location and direction of the IEEE1394 port, refer to the computer User's Manual. 2 Attach the cable protector to the plug with the < > mark, and then connect to the < > terminal on your camera. O When connecting the interface cable plug to the computer and camera, make sure you match the shape of the plug with the shape of the IEEE1394 port before connecting. The camera or computer may become damaged if connected incorrectly. O Although you can use the USB interface cable (IFC-400PCU) provided with your camera to connect the camera and computer, EU communication will not be possible. Use the IEEE1394 interface cable (IFC-200D4). If your computer has a 4-pin type IEEE1394 port, you will need to use a 4-pin - 4-pin type Canon interface cable (sold separately). Introduction Contents at a Glance 1 Downloading Images 2Camera Settings 3Remote Shooting 4 Preferences Reference Index O Connect with the < > mark on the plug facing the top of the camera. O For cameras not provided with the cable protector, connect the plug directly to the camera. O Image downloading preparation is now complete. Continue with "Starting up EU" (p.9). 7