Canon EOS 5D Mark II Instruction Manual - Page 27

Limited Warranty, Technical Support

Page 27 highlights

NOTE: To shoot photographs closer than 2 feet (0.6m), we recommend using an external strobe such as the DS51 or DS161. An external strobe can be positioned so nothing blocks the light path between the strobe and the subject. Storing the Housing When the housing is going to be stored for a prolonged period it should be soaked in a mild soap solution, rinsed, and dried thoroughly. Remove the back and port from the housing. Remove the back and port o-rings, lightly lubricate them and place them in a plastic ziploc bag. Place the plastic bag inside the housing for storage. Operate the push buttons periodically. Technical Support Email: [email protected] Phone 317.923.4523 Fax 317.924.7988 Limited Warranty This Ikelite product is warranted against any manufacturing defects for a period of one year from the original date of purchase. Defective products should be returned prepaid to Ikelite. Ikelite will, at its discretion, repair or replace such products, and will return to customer prepaid. All other claims of any nature are not covered. Except as mentioned above, no other warranty expressed or implied, applies to this Ikelite product. 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

27
Phone 317.923.4523
Fax 317.924.7988
NOTE:
To shoot photographs closer than 2 feet (0.6m), we recommend
using an external strobe such as the DS51 or DS161. An external strobe
can be positioned so nothing blocks the light path between the strobe
and the subject.
This Ikelite product is warranted against any manufacturing defects for a
period of one year from the original date of purchase. Defective products
should be returned prepaid to Ikelite. Ikelite will, at its discretion, repair
or replace such products, and will return to customer prepaid. All other
claims of any nature are not covered. Except as mentioned above, no
other warranty expressed or implied, applies to this Ikelite product
.
Storing the Housing
When the housing is going to be stored for a prolonged period it should
be soaked in a mild soap solution, rinsed, and dried thoroughly. Remove
the back and port from the housing. Remove the back and port o-rings,
lightly lubricate them and place them in a plastic ziploc bag. Place the
plastic bag inside the housing for storage. Operate the push buttons
periodically
.
Limited Warranty
Technical Support