Canon EOS Rebel T3i 18-55mm IS II Kit EOS REBEL T3i / EOS 600D Instruction Man - Page 287
Error Codes
View all Canon EOS Rebel T3i 18-55mm IS II Kit manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 287 highlights
Error Codes Error No. If there is a problem with the camera, an error message will appear. Follow the onscreen instructions. Countermeasures No. Error Message & Solution Communications between the camera and lens is faulty. Clean the lens contacts. 01 Î Clean the electrical contacts on the camera and lens and use a Canon lens (p.15, 18). Card cannot be accessed. Reinsert/change card or format card with camera. 02 Î Remove and insert the card again, replace the card, or format the card (p.29, 45). Cannot save images because card is full. Replace card. 04 Î Replace the card, erase unnecessary images, or format the card (p.29, 224, 45). The built-in flash could not be raised. Turn the camera off and on 05 again. Î Operate the power switch (p.32). Sensor cleaning is not possible. Turn the camera off and on 06 again. Î Operate the power switch (p.32). 10, 20, Shooting is not possible due to an error. Turn the camera off and 30, 40, on again or re-install the battery. 50, 60, Î Operate the power switch, remove and install the battery pack 70, 80 again, or use a Canon lens (p.32, 28). * If the error still persists, write down the error No. and contact your nearest Canon Service Center. 287