Canon EOS Rebel T4i Instruction Manual - Page 31
Installing and Removing the Card - memory
View all Canon EOS Rebel T4i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Installing and Removing the Card The card (sold separately) can be an SD, SDHC, or SDXC memory card. SDHC and SDXC cards with UHS-I can also be used. The captured images are recorded onto the card. Make sure the card's write-protect switch is set upward to enable writing/erasing. Installing the Card 1 Open the cover. Slide the cover as shown by the arrows to open it. Write-protect switch 2 Insert the card. As shown by the illustration, face the card's label side toward you and insert it until it clicks in place. 3 Close the cover. Close the cover and slide it in the direction shown by the arrows until it snaps shut. Possible shots When you set the power switch to , the number of possible shots (p.35) will be displayed on the LCD monitor. The number of possible shots depends on the remaining capacity of the card, image-recording quality, ISO speed, etc. Setting [z1: Release shutter without card] to [Disable] will prevent you from forgetting to insert a card (p.200). 31