Canon EOS Rebel T5i User Manual - Page 232
Select [Built-in flash settings]., Select [EasyWireless]., Set [Channel]., Take the picture., Exit
View all Canon EOS Rebel T5i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 232 highlights
Easy Wireless Flash Shooting 4 Select [Built-in flash settings]. Select [Built-in flash settings], then press . 5 Select [EasyWireless]. Under [Built-in flash], select [EasyWireless], then press . 6 Set [Channel]. Set the transmission channel (1-4) to the same one as the slave unit. 7 Take the picture. Set the camera and take picture in the same way as with normal shooting. 8 Exit the wireless flash shooting. For [Built-in flash], select [NormalFiring]. Setting [E-TTL II meter.] to [Evaluative] is recommended. Even though the firing of the built-in flash is disabled when [EasyWireless] is set, it will still fire a small flash to control the slave unit. Depending on shooting conditions, the flash fired to control the slave unit may appear in the picture. Firing a test flash is not possible with the slave unit. 232