Canon FAX-JX200 FAX-JX200/JX201 User'sGuide - Page 2

3 Loading Paper a Open the Document Cover and extend the Paper Support to support the paper. b Squeeze, then slide the Paper Guide to the left. c Tap the edge of the stack on a flat surface to even the stack. d Insert the stack face up into the Multi-Purpose Tray , and align the right edge of the stack with the right side of the MultiPurpose Tray. Then slide the Paper Guide snugly against the left edge of the stack. Be careful not to press the Paper Guide strongly against the stack, or the paper will not be fed properly. e Adjust the Document Guide to the width of the document, and gently insert the top of the document face up into the Document Tray until you hear a beep. 4 Setting RECEIVE Mode Press [Receive Mode/Resolution] to change the receive mode. For details on ANS.MACHINE MODE, refer to "Receiving Documents with an Answering Machine: ANS.MACHINE MODE" in "Receiving Faxes" of the User's Guide. For details on DRPD, refer to "Receiving with a DRPD (Distinctive Ring Pattern Detection) service: DRPD" in "Receiving Faxes" of the User's Guide. ● MANUAL Mode Pick up the Handset to answer the call. Press [Start/Copy]. Rings for every call, regardless of whether the call is a fax call or a voice call. For a fax call, you have to manually activate reception of the fax. ● FAX/TEL Mode Receives documents automatically. Pick up the Handset to answer the call. Automatically switches between fax and voice calls. Receives documents automatically and rings for voice calls. ● FAX ONLY Mode Answers all calls as fax calls. Receives documents automatically and disconnects voice calls. ● TAM Mode (FAX-JX500/FAX-JX300 only) 5 Examples of Connecting the Machine Typical examples of connecting the machine are described below. The machine cannot send/receive faxes if the connection is incorrect. Connect the machine correctly. The following are examples of the type of connecting that can be made. ● Connecting to the Telephone Line ● Connecting to an Analog Line (A) (A) Telephone line (analog) ● Connecting to an ADSL (C) (B) (D) (E) (B) Asymmetric Digital Subscriber Line (C) Splitter (D) ADSL modem (splitter may be built-in to the modem) (E) Computer For details on ADSL connection and settings, see the manual supplied with your ADSL modem. The illustrated connection is an example and is not guaranteed to suit every connecting condition. ● Connecting to an ISDN Line (G) (H) (F) (I) (F) ISDN line (G) Terminal adapter, etc. (H) Analog port (I) Computer For details on ISDN connection and settings, see the manuals supplied with your terminal adapter or dial-up router. ● Connecting External Devices ● Connecting a Telephone or Answering Machine Directly The TAM Lamp lights up. Record an outgoing message. Press [TAM] to set TAM MODE. The fax receives documents automatically. To hear the recorded messages, press [Play]. Refer to "Playing Telephone Messages" in "Using TAM Mode" of the User's Guide. You may change the number of times the phone rings before the answering machine answers a call. Refer to "Setting TOLL SAVER" in "Using TAM Mode" of the User's Guide. If the LCD displays "TAM MEMORY FULL" when you turn the answering system on, please delete some of the messages stored in memory. Refer to "Deleting a Document from Memory" in "Receiving Faxes" of the User's Guide. (J) (J) Telephone or Answering machine Take off the protective tape on the back of the machine when you connect an external device. XXXXXXXX Replacing the FINE Cartridge The LED lights up. When the ink level is low, the LED lights up. In this state the FAX will receive documents to memory (up to 30 transactions or 120 pages (FAX-JX200/JX201: 60 pages)). To print all unprinted documents in memory select from the menu. After printing, delete unnecessary faxes from the memory. Refer to "Documents Stored in Memory" in "Receiving Faxes" of the User's Guide. Press [MENU]. The LED blinks. Replace the FINE Cartridge. When the ink is empty, the LED blinks. When this occurs, you cannot print out any documents in memory. Replace the FINE Cartridge with new one. Refer to "Replacing a FINE Cartridge" in "Routine Maintenance" of the User's Guide. © CANON INC. 2007 PRINTED IN THAILAND