Canon HF200 VIXIA HF20/HF200 Instruction Manual - Page 160
There is a problem with the paper. The paper is not correctly loaded or the paper size is
UPC - 013803109689
View all Canon HF200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
- You attempted to print from a memory card that contains a large number of photos. Reduce the number of photos. File error - You attempted to print a photo that was recorded with another camcorder, has a different compression, or was edited on a computer. Hardware error - Cancel printing. Turn off the printer and turn it back on. - Check the printer status. - Ink tank errors have occurred. Replace the ink tank. Incompatible paper size - The paper settings of the camcorder conflict with the printer's settings. Ink absorber full - Select [Continue] to resume printing. Consult a Canon Service Center (refer to the list included with the printer) to replace the ink absorber. Ink error - An empty ink cartridge is installed. Replace the ink cartridge. Low ink level - The ink cartridge needs to be replaced soon. Select [Continue] to restart printing. No print orders have been set - No photos have been marked with a print order. No ink - The ink cartridge is not inserted or is out of ink. No paper - Paper is not correctly inserted or there is no paper. Paper error - There is a problem with the paper. The paper is not correctly loaded or the paper size is wrong. - If the paper output tray is closed, open it to print. Paper jam - The paper jammed during printing. Select [Stop] to cancel printing. After removing the paper, set some paper again and retry printing. Paper lever error - Paper lever error occurred. Adjust the paper selection lever to the proper position. X photos could not be printed - You attempted to use the print order settings to print X photos that were recorded with another camcorder, have a different compression, or were edited on a computer. 160 Additional Information