Canon HV10 HV10 Instruction Manual - Page 21
The Wireless Controller, Adjusting the LCD Screen
UPC - 013803063776
View all Canon HV10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Preparations Getting Started 21 2 Adjust the viewfinder. 3 Insert the battery holder. Keep the LCD panel closed to use the viewfinder and adjust the dioptric Using the Wireless Controller E adjustment lever as necessary. 3 Fasten the grip belt. Adjust the grip belt so that you can reach the zoom lever with your index finger, and the start/stop button with your thumb. I.AF sensor Point the controller at the camcorder's remote sensor when you press the buttons. NOTES To make use of the full capabilities of the instant AF function ( 31), be careful not to obstruct the I.AF sensor. NOTES The wireless controller may not work properly when the remote sensor is situated under strong light sources or direct sunlight. If the wireless controller does not work, check that [WL.REMOTE] is not set to [OFF ] ( 37). Otherwise, replace the battery. The Wireless Controller Inserting the Battery (Lithium Button Battery CR2025) Adjusting the LCD Screen Rotating the LCD Panel Open the LCD panel 90 degrees. You can rotate the panel 90 degrees downward. 180° Tab 90° 1 Press the tab in the direction of the arrow and pull out the battery holder. 2 Place the lithium button battery with the + side facing up. You can rotate the panel 180 degrees toward the lens (allowing the subject to monitor the LCD screen while you use the viewfinder). Rotating the panel 180