Canon LV-7220 /app/pdf/projector/lv5220-7220-7225_manual.pdf - Page 43
Enter a Logo PIN code, Change the Logo PIN code, Logo PIN code lock, Display, Blue back
![]() |
View all Canon LV-7220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Setting Setting Blue back When this function is "On," the projector produces a blue image while input signal is not detected. Display This function decides whether to display On-Screen Displays. On shows all the On-Screen Displays. Off does not show On-Screen Displays except; ● On-Screen Menu ● "Power off?" message ● P-Timer ● "No signal" message ● "Wait a moment!" message Logo PIN code lock This function prevents an unauthorized person from changing the Logo setting. Off . . . . .the Logo setting can be changed freely from the Logo menu. (p44) On . . . . . .the Logo setting cannot be changed without the Logo PIN code. If you want to change the Logo PIN code lock setting, enter a Logo PIN code along the following steps. The initial Logo PIN code is set "4321" at the factory. Enter a Logo PIN code Select a number by pressing the Point 7 8 button and fix the number with the SET button. The number will change to "✳". If you fixed a wrong number, move the pointer to "Set" or "Clear" once by pressing the Point d button, then return to "Logo PIN code". Enter the correct number again. Repeat this step to complete entering a four-digit number. When the four-digit number is fixed, the pointer will automatically move to "Set". Press the SET button so that you can change the Logo PIN code lock setting. If you entered a wrong Logo PIN code, "Logo PIN code" and the number will turn red and disappear. Enter a correct Logo PIN code all over again. Change the Logo PIN code Logo PIN code can be changed to your desired four-digit number. Select "Logo PIN code change" with the Point d button and press the SET button. Set a new Logo PIN code. Be sure to note the new Logo PIN code and keep it at hand. ✔Note: If you forget your Logo PIN code and unable to change it, the Logo P IN code can be reset to the factory default setting (4321) according to the following procedures. When you reset the Logo PIN code, the PIN code and Key lock will be reset, as well. 1. Disconnect the AC Power Cord from the AC outlet. 2. As pressing the SET button on the projector, connect the AC Power Cord into an AC outlet again. Keep pressing the SET button until the POWER indicator lights. The Logo PIN code will be returned to the factory default setting while the Logo PIN code lock state will remain the same as previous set state. Logo PIN code lock Logo PIN code lock Dialog Box Pointer Quit After a correct Logo PIN code is entered, the following dialog box will appear. Select On/OFF by pressing the Point 7 8 button or change the Logo PIN code. 43
![](/manual_guide/products/canon-lv7225-apppdfprojectorlv522072207225manualpdf-02dad73/43.png)