Canon LV-7240 User Manual - Page 29
Note on Startup screen (Menu Language Select screen), Use the SELECT, button to select one of
View all Canon LV-7240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
3. Projecting an Image (Basic Operation) Note on Startup screen (Menu Language Select screen) When you first turn on the projector, you will get the Startup menu. This menu gives you the opportunity to select one of the 8 menu languages. To select a menu language, follow these steps: 1. Use the SELECT or button to select one of the 8 languages for the menu. LAMP REPLACE WARNING POWER VIDEO S-VIDEO COMPUTER-1 COMPUTER-2 VOL VOL - + AUTO PC OFF POWER NO SHOW D.ZOOM PAGE MENU BACK 2. Press the OK button to execute the selection. VOL - After this has been done, you can proceed to the menu operation. If you want, you can select the menu language later. See "Language" on pages 34 and 40. LAMP REPLACE WARNING POWER VIDEO S-VIDEO COMPUTER-1 COMPUTER-2 VOL + AUTO PC OFF POWER NO SHOW D.ZOOM PAGE MENU BACK NOTE: Immediately after turning on the projector, screen flicker may occur. This is normal. Wait 3 to 5 minutes until the lamp lighting is stabilized. When the Lamp mode is set to Quiet, the LAMP REPLACE indicator will light green. If one of the following things happens, the projector will not turn on. • If the internal temperature of the projector is too high, the projector will not turn on to protect the internal system. Please wait for the projector's internal components to cool down. • When the lamp reaches its end of usable life, the projector will not turn on. If this happens, replace the lamp. • If the lamp fails to light, and if the WARNING indicator flashes on and off in a cycle of six times, wait a full minute and then turn on the power. 21