Canon LV-X5 User Manual - Page 23

2. Installation and Connections NOTE: An image may not be displayed correctly when a Video or S-Video source is played back via a commercially available scan converter. This is because the projector will process a video signal as a computer signal at the default setting. In that case, do the following. * When an image is displayed with the lower and upper black portion of the screen or a dark image is not displayed correctly: Project an image to fill the screen and then press the AUTO PC button on the remote control or the projector cabinet. To connect Scart output (RGB) Video equipment such as DVD player Female ANALOG IN-1 Projector VIDEO IN L AUDIO IN R ANALOG IN-1 AUDIO IN ANALOG IN-2 S-VIDEO IN MONO L AUDIO IN R AUDIO OUT SERVICE PORT MONO AC IN To ANALOG 1 input Commercially available Scart cable LV-CA35 Before connections: An exclusive Scart adapter (LV-CA35) and a commercially available Scart cable are required for this connection. NOTE: Audio signal is not available for this connection. 1. Turn off the power to the projector and your video equipment. 2. Use the LV-CA35 Scart adapter and a commercially available Scart cable to connect the RGB input of your projec- tor and a Scart output (RGB) of your video equipment. 3. Connect the supplied power cord. See page 19. 4. Turn on the power to the projector and your video equipment. 5. Use the COMPUTER-1 button on the projector cabinet to select the ANALOG IN-1 input. 6. Press the MENU button on the projector cabinet to display the menu. 7. From the menu, select [Advanced settings] → [Signal select] → [Computer-1] → [Scart]. Scart is a standard European audio-visual connector for TVs, VCRs and DVD players. It is also referred to as Euroconnector. NOTE: The LV-CA35 Scart adapter is obtainable from your dealer in Europe. Contact your dealer in Europe for more information. 15