Canon MAXIFY GX7020 GX7000 series User Manual - Page 211

Firmware update You can update the firmware of the printer, check the firmware version, or perform settings of a notification screen, a DNS server and a proxy server. Important • The administrator password is required to change the settings if it is enabled to change the settings on the operation panel using the administrator password. • When you use this function, make sure the printer is connected to the Internet. Note • Check current version and Update notification settings are available when Disable is selected for Enable/disable Wi-Fi of Wi-Fi in LAN settings. • Install update Performs the firmware update of the printer. If you select Yes, the firmware update starts. Follow the onscreen instructions to perform update. Note • If the firmware update is not complete, check the following and take an appropriate action. Check the network settings. If Cannot connect to the server. is displayed on the touch screen, select OK and try again after a while. • Check current version You can check the current firmware version. • Update notification settings When ON is selected and the firmware update is available, the screen to inform you of the firmware update is displayed on the touch screen. • DNS server setup Performs settings for a DNS server. Select Auto setup or Manual setup. If you select Manual setup, follow the display on the touch screen to perform settings. • Proxy server setup Performs settings for a proxy server. Follow the display on the touch screen to perform settings. 211