Canon MF6580CX imageCLASS MF6500 Series Advanced Guide - Page 108
Receiving Problems
UPC - 013803062847
View all Canon MF6580CX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Advanced Fax Features 1 Advanced Copy Features 2 Network 3 Remote UI 4 System Monitor 5 Reports and Lists 6 Troubleshooting 7 Appendix 8 ■ Receiving Problems Cannot receive a fax automatically. Q Is the machine set to receive automatically? A For the machine to receive faxes automatically, receive mode must be set to , , or . If you have set , confirm that an answering machine is connected to the machine and that it is turned on with an outgoing message properly recorded. (See "Setting Receive Mode," on p. 1-8.) Q Is a document stored in memory, leaving little or no memory available? A Print, send, or delete any documents stored in memory. Q Has an error occurred during reception? A Check the LCD for an error message. (See Chapter 12, "Troubleshooting," in the Basic Guide.) A Print an Activity Report and check for an error. (See "ACTIVITY REPORT," on p. 6-5.) Back Previous Next TOP Q Is paper loaded in the machine? A Make sure paper is loaded in the machine. (See "Set Up the Machine," in the Starter Guide.) Q Is the telephone cable connected properly? A Make sure the cable is connected properly. (See "Set Up the Machine," in the Starter Guide.) No automatic switching between telephone and fax calls. Q Is the machine set to switch automatically between telephone and fax calls? A For the machine to switch between fax and telephone calls automatically, the receive mode must be set to , , or . If you have set , confirm that an answering machine is connected to the machine and that it is turned on with an outgoing message properly recorded. (See "Setting Receive Mode," on p. 1-8.) Table of Contents Index 7-9