Canon MF7280 imageCLASS MF7280 Network Guide - Page 59
Windows 2000/XP/Server 2003, Changing the Port after Installing the Driver, Installing a New Driver
UPC - 013803056129
View all Canon MF7280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
■ Changing the Port after Installing the Driver 1 Install Canon LPR2, and change the port settings. For instructions on how to install Canon LPR2 and set ports, see the Canon LPR2 User's Guide (PDF manual) on the UFR II Printer Kit/Super G3 FAX Board CD-ROM. IMPORTANT If you want to use LPD, enter one of the following in [LPR Queue Name] in the [Add Port] dialog box of Canon LPR2. 3 - LP The machine prints according to its spool settings. Normally enter as a print queue. - SPOOL The machine prints only after spooling a print job on the hard disk, regardless of its spool settings. - DIRECT The machine prints without spooling a print job on the hard disk, regardless of its spool settings. Using a TCP/IP Network The installation of the driver and the port settings is complete. Windows 2000/XP/Server 2003 ■ Installing a New Driver 1 Install the driver. Install the driver according to the procedures indicated in the Starter Guide. NOTE • The print application will be LPD and the print queue will be set to if the driver has been installed according to the above procedures. • This machine enables you to specify print queues other than . You can also use Raw as the print application. For instructions on how to change the settings, see "Changing the Port after Installing the Driver," on p. 3-27. 3-26 Setting Up a Computer for Printing/Sending a Fax