Canon MP140 MP140 series Quick Start Guide - Page 8
Turning the Machine On and Off, Turning On the Machine, To Save Energy - cartridges
UPC - 013803081206
View all Canon MP140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Turning the Machine On and Off Turn on the machine before printing. Turning On the Machine Before turning on the machine, confirm the following. z The FINE Cartridges are installed properly. z The machine is connected to your computer (or a compatible device). z The MP Drivers are installed. Note If preparatory operations above are not complete, follow your setup sheet to complete them. 1 Press the ON/OFF button. The POWER lamp flashes and then remains lit green. Important If the ALARM lamp begins to flash orange, see "An Error Code Is Displayed on the LED" on page 37. 2 If you are using the machine connected to a computer, turn on your computer. Turning Off the Machine 1 To turn off the machine, press the ON/OFF button. When the POWER lamp stops flashing, the machine is turned off. Important About the Power Plug When removing the power plug after turing off the machine, be sure to confirm that the POWER lamp is not lit. If the power plug is removed from the wall outlet with the POWER lamp still lit or flashing green, the machine may become unable to print. See "Keeping the Best Printing Results" on page 31. z To Save Energy The LED goes out if the machine is not operated for about five minutes*. Perform a print operation to restore the display. *You cannot change the wait time before the LED goes out. Note When you want to restore the display, perform a print operation or press any button except ON/ OFF button. When you press the ON/OFF button while the machine is in Screen-saver mode, the machine turns off. 4 Before Using the Machine