Canon MP360 MultiPASS MP370/360 User's Guide - Page 98
Paper Curls, Outputting Stops In-progress, When Copying Or Printing From A Computer, When Copying
UPC - 013803037128
View all Canon MP360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Cause Action The platen glass or the inside of the Clean the platen glass and the inside of the document cover. document cover is dirty. (See page 89) X Paper Curls Cause Action You are using thin paper to print. Use 17 lb.-28 lb. (64 g/m2-105 g/m2) paper. (See page 15) You have set curled paper in the Uncurl the paper, then load it into the multi-purpose tray. multi-purpose tray. You are printing images that use a Use thicker paper such as High Resolution Paper or Glossy Photo large quantity of ink such as Paper. photographs or pictures. X Outputting Stops In-progress When Copying Or Printing From A Computer Cause Paper does not feed properly. The machine has been printing continuously over a long period. Action See "Cannot Print At All, Cannot Print Correctly," on page 94. If so, the print head will overheat. To protect the print head, printing will stop temporarily and resume after a period of time. Interrupt printing when appropriate, turn OFF the machine, and wait at least 15 minutes. CAUTION • The area around the print head may become extremely hot. Do not touch it under any circumstances. When Copying Cause Action You are copying documents such If you are copying documents with fine mode, processing the data as photographs or illustrations with will take time, and copying will appear to have stopped. Wait until fine mode. data is processed. If you are copying a document with a large printing area (with small margins) or are copying multiple sets, copying may stop to allow the ink time to dry. 96 Troubleshooting Chapter 11