Canon MP560 Solución de problemas de configuración de red [Spani - Page 12
Restoring the Machine's Default LAN Settings to Perform Setup Again, Reset LAN settings, LAN settings - reset button
UPC - 013803110067
View all Canon MP560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
ENGLISH Restoring the Machine's Default LAN Settings to Perform Setup Again Action Follow the procedure below to restore LAN settings of the machine to the default state. 1 Use the Easy-Scroll Wheel to select Settings, then press the OK button. 5 Select Yes, then press the OK button. 6 Make sure that the screen shown to the right appears. • After a while, the LAN settings screen returns. 2 Select Device settings, then press the OK button. 3 Select LAN settings, then press the OK button. The LAN setting of the machine is now restored to the default state. • Perform setup again by following the procedures in "Wireless Setup" on page 22 and onward in the printed manual: Getting Started. Wireless connection SSID Data encryption TCP/IP setting Inactive BJNPSETUP Inactive Obtain an IP address automatically 4 Select Reset LAN settings, then press the OK button. 11