Canon MP600 Easy Setup Instructions - Page 2

Windows® MP Drivers Installation Macintosh® MP Drivers Installation Windows Note • The screens below refer to Windows XP Service Pack 2 installation. Screens may vary depending on the operating system you are using. • For Windows XP or Windows 2000, log on to Windows as a member of the Administrators group before continuing. • Before installing the driver, disable all anti-virus programs and automatically loading programs. a Turn off the machine. (1) Press the ON/OFF button. (2) Make sure that the POWER lamp stops flashing. b Turn the computer on and start Windows. Important If you see the Found New Hardware Wizard, remove the USB cable. Click Cancel to quit the screen. Next, turn off the machine. Then proceed from step 3 to install the MP Drivers. f Read the License Agreement carefully and click Yes. Follow the on-screen instructions to install the software. If a message asking for your confirmation to restart your computer appears, click OK. g When the Printer Connection screen appears, connect the machine with a USB cable, then turn the machine on. The software will begin identifying the printer port being used. Important If you cannot go to the next procedure after 3 minutes, refer to "Troubleshooting" instructions in the User's Guide on-screen manual. Macintosh Important Since Mac® OS 9, Mac OS X Classic environments, or Mac OS X v.10.2.7 or earlier are not supported, do not connect the machine to these. Note • Use Mac OS X v.10.2.8 to 10.4.x. • The screens below refer to Mac OS X v.10.4.x installation. Screens may vary depending on the operating system you are using. • Log on as an Administrator before continuing. • Before installing the driver, disable all anti-virus programs and automatically loading programs. a Connect one end of the USB cable to the computer, the other to the machine. Note Make sure the machine is turned on. g When the list of applications to install appears, confirm the contents, then click Install. Note Move the cursor over items to display explanations of each application. h Read the License Agreement carefully and click Yes. Follow the on-screen instructions to install the software. i Follow the on-screen instructions to register your product. Note When the User Registration screen appears, follow on-screen instructions to register your product. You will need your product serial number, which is located on the inside of the machine. See Step 1- f on the front page. j When the Installation completed successfully screen appears, click Restart. c Insert the Setup CD-ROM. The setup program should run automatically. Note The setup program should run automatically. If the installer in the CD-ROM does not run automatically, click Start and select My Computer, then double-click the CD-ROM icon . d When the main menu appears, click Easy Install. h Follow the on-screen instructions to register your product. Note When the User Registration screen appears, follow on-screen instructions to register your product. You will need your product serial number, which is located on the inside of the machine. See Step 1- f on the front page. i When the Installation completed successfully screen appears, click Exit. Note • Select Easy Install in order to install the MP Drivers, on-screen manuals, and application software. Select Custom Install in order to choose the options you would like to install. • To install Adobe® RGB (1998), click Custom Install and follow the on-screen instructions. If you are using Windows Me/98, Adobe RGB cannot be installed. e When the list of applications to install appears, confirm the contents, click Install. Note Move the cursor over items to display explanations of each application. If Restart is displayed, make sure that the Restart the system now (recommended) check box is selected, then click Restart. Now you have completed installation of the software. b Turn on your Mac. c Insert the Setup CD-ROM. Note If the CD-ROM folder does not open automatically, double-click the CD-ROM icon on the desktop. d Double-click the Setup icon. e When the Authenticate screen appears, enter your administrator name and password. Click OK. If you do not know your administrator name or password, click , then follow the on-screen instructions. f When the main menu appears, click Easy Install. Note Select Easy Install in order to install the MP Drivers, on-screen manuals, and application software. Select Custom Install in order to choose the options you would like to install. The system is restarted automatically. *When using Mac OS X v.10.2.8 to v.10.3.3: Restarting the computer while connected to the machine may cause the machine not to be detected. To resolve this, either unplug the USB cable then plug it back in again, or turn the machine off then back on again. k After restarting the computer, start Printer Setup Utility (start Print Center if you are using Mac OS X v.10.2.8) and then check that the printer name you want to use is shown in Printer List. If the printer name is not displayed, click Add to add the device. For more detailed instructions, refer to the Mac on-screen Help. Now you have completed installation of the software. Part no. QT5-0683-V02 © 2006 Canon Inc. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or other countries. Macintosh and Mac are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. Adobe and Adobe RGB (1998) are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. All other product and brand names are trademarks of their respective owners. Specifications subject to change without notice. Printed in Thailand.