Canon MX350 MX350 series Getting Started - Page 12

displayed and go to the next step., Be sure to follow the procedure below. - cartridges

Get Canon MX350 PDF manuals and user guides View all Canon MX350 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

3 4 D C □ Turning the power off Be sure to follow the procedure below. E 1. Press the ON button (A) to turn off the machine. 2. Make sure that all the lamps on the Operation Panel are not lit. 1 A 2 Use the { or } button (C) on the Operation Panel to select the language for the LCD (Liquid Crystal Display) (D), then press the OK button. Make sure that the above screen is displayed and go to the next step. • If an unintended language is displayed on the LCD, press the Back button (E) to return to the Language selection screen. Operating noise may continue for up to 30 seconds until the machine turns off. • When removing the power plug, make sure that all the lamps on the Operation Panel are not lit before removing the plug. Removing the power plug while all the lamps on the Operation Panel light up or flash may cause drying and clogging of the FINE Cartridges, resulting in poor printing. If your machine is used as fax • Removing the power plug deletes all faxes stored in memory. Send or print faxes as necessary before removing the power plug. 10 4 Turn the Power On

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
3
E
4
C
D
1
2
A
10
4
Turn the Power On
Turning the power off
□
When removing the power plug, make sure that all the
lamps on the Operation Panel are not lit before removing
the plug. Removing the power plug while all the lamps on
the Operation Panel light up or flash may cause drying and
clogging of the FINE Cartridges, resulting in poor printing.
•
Use the
{
or
}
button (C) on the Operation Panel
to select the language for the LCD (Liquid Crystal
Display) (D), then press the
OK
button.
If an unintended language is
displayed on the LCD, press the
Back
button (E) to return to the
Language selection
screen.
•
Make sure that the above screen is
displayed and go to the next step.
If your machine is used as fax
Removing the power plug deletes all faxes stored
in memory. Send or print faxes as necessary before
removing the power plug.
•
Be sure to follow the procedure below.
1. Press the
ON
button (A) to turn off the machine.
2. Make sure that all the lamps on the Operation Panel
are not lit.
Operating noise may continue for up to 30 seconds until the
machine turns off.