Canon MX7600 Easy Setup Instructions for Preparing the Machine - Page 1
Canon MX7600 - PIXMA Color Inkjet Manual
UPC - 013803087895
View all Canon MX7600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
1 Easy Setup Instructions for Preparing the Machine Unpack the Machine • Please confirm the included items against the illustration printed on the lid of the packing box. • A USB cable is necessary to connect the machine with your computer. 1 Prepare the Machine a Locate the machine on a level place. Caution Since this machine weights approximately 36.6 lbs. (16.6 kg), it is recommended that two people move or relocate the machine. Note Be sure to remove the tapes and protective material before you turn on the machine. When lifting the machine with two people When lifting the machine alone d Plug the power cord in the back of the machine and connect the other end to the wall outlet. Document Cover Do not hold this part! Place your fingers in the indented portions on the bottom of the machine. b Remove the protective material in the ADF (Auto Document Feeder). Protective Material Important • Make sure that the Document Cover is closed. • Do NOT connect the USB cable at this stage. e Press the ON/OFF button to turn on the machine. The machine will initialize. Wait until the COPY button stops flashing and remains lit green. f Press the { or } button on the Operation Panel to select the language for the LCD, then press the OK button. Office All-In-One Important When cleaning the exterior of the machine, use a soft cloth to wipe it gently. For details, refer to "Cleaning Your Machine" in the Quick Start Guide. 2 Install the Print Head a Firmly raise the Print Head Lock Lever until it stops. The Print Head Lock Lever may feel heavy. e Push the Print Head to hold it in place, and lower the Print Head Lock Lever. Important • Make sure that the machine is turned on and the COPY button lights green. • Make sure that the Print Head Holder has moved to the center. b Remove the Print Head from its package. Do not touch! Important If the Scanning Unit (Printer Cover) is left open for more than 10 minutes, the Print Head Holder moves to the right. Close and reopen the Scanning Unit (Printer Cover) to return the Holder to the center. Proceed to the step 3 on the reverse side. Note • The tape or the protective material position is subject to change. Installing cleaning sheets • Cleaning sheets can be stored in the Cleaning Sheet Holder. For details on installing cleaning sheets, refer to "Cleaning the Inside of the Machine (Sheet Cleaning)" in the Quick Start Guide. (1) Press the { or } button to select the language. (2) Press the OK button. This machine comes with five cleaning sheets. c Connect the telephone line and any necessary external device. You can connect an external device (telephone or answering machine) if necessary. Remove the Telephone connector cap to connect the external device. Important If an unintended language is displayed on the LCD, press the Back button on the Operation Panel to return to the Language selection screen. Once the message "Install the print head and set the ink tank." appears, go to g. g Lift the Scanning Unit (Printer Cover) until it locks into place. The Paper Output Tray will open automatically and the Print Head Holder moves to the center. Then open the Output Tray Extension. If the Paper Output Tray does not open automatically, press the Open button to open it. Telephone connector cap Connect the telephone line cable to the wall jack. Connect external devices as follows: External Device Jack Telephone Line Jack Telephone or answering machine Telephone line Telephone or answering machine Machine Built-in computer modem and telephone Telephone line Machine LINE TEL Computer Telephone Important Be sure to use the bundled telephone line cable. Caution For your safety, always firmly grip the areas illustrated when lifting the Scanning Unit (Printer Cover). Important If the Document Cover is opened, you cannot open the Scanning Unit (Printer Cover). Be sure to open the Scanning Unit (Printer Cover) with the Document Cover closed. Caution There may be some transparent or light blue ink on the inside of the bag the print head comes in, or the inside of the protective cap - this has no effect on print quality. Be careful not to get ink on yourself when handling these items. c Remove the orange protective cap from the Print Head and discard it. Electrical Contacts Print Head Nozzles Protective Cap Important Do not touch the print head nozzles or the electrical contacts. d Insert the Print Head. Do not touch!