Canon Macro Ring Lite MR-14EX MACRO RING LITE MR-14EX/MACRO TWIN LITE MT-24EX - Page 20
Turning on the Power Switch, Fully Automatic Flash Shooting - ii
View all Canon Macro Ring Lite MR-14EX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Turning on the Power Switch 1 Turn on the power switch. Set the power switch to or . X The flash recycling starts. 2 Check that the flash is ready. The pilot lamp will light in red (fully charged) when the flash is ready. X Pressing the pilot lamp will fire a test flash. To save battery power, the Save Energy feature automatically turns off the MR-14EX/MT-24EX after 90 sec. of non-operation. To turn on the MR14EX/MT-24EX again, press the camera's shutter button halfway. A test firing cannot be fired while the camera's operation timer 4 or 0 is active. The MR-14EX/MT-24EX's settings will be retained in memory even after the power is turned off. To retain the MR-14EX/MT-24EX's settings when you replace the batteries, replace the batteries within 1 minute after turning off the power. Fully Automatic Flash Shooting When the camera's shooting mode is set to (Program AE) or (Full Auto), E-TTL II/E-TTL fully automatic flash photography will be enabled, making it as easy as normal AE shooting in the or mode. 1 Set the MR-14EX/MT-24EX to . Press the button to display . 2 Take the picture. Focus the picture and check that the icon is lit in the viewfinder. X If a standard flash exposure was obtained, the flash exposure confirmation lamp will light for about 3 sec. 18