Canon MultiPASS F60 MultiPASS F60 Setup Sheet - Page 4
Install the printhead.
View all Canon MultiPASS F60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Install the printhead. IMPORTANT • To turn off the machine, be sure to always press [ON/OFF(1sec.)]. This will ensure that the printhead is capped and prevent it from drying up. • If you are not using the machine for a long period of time, we recommend that you print (in black and color) or clean the printhead approximately once a month to maintain the printhead in good working condition. 1 Press [Open] q and lift up the scanning unit w. Then remove the tape A. w q IMPORTANT • Do not touch the metal rod or any parts inside the machine. • Do not turn off the machine when opening the scanning unit. A 2 Remove the printhead from its packaging, then remove the orange protective cap B. B IMPORTANT • Do not touch the electrical contacts C. C 3 Raise the lock lever D, then gently slide the printhead into the holder. Lower the lock lever. D IMPORTANT Turn over to • Do not touch the lock lever once the printhead has been installed. continue