Canon P-150 Reference Guide - Page 16

Scanning with CaptureOnTouch Installing CaptureOnTouch Do not connect the scanner to the computer before Installing CaptureOnTouch. Insert the Setup disc into the computer's DVD-ROM drive. Connecting the Scanner to the Computer A Turn ON the computer. B Set the Auto Start switch on the scanner to OFF. C Connect the scanner to the computer using the supplied USB cable. (Connect the power supply USB cable, if higher speed scanning is necessary.) Auto Start OFF ON Set to OFF. ▼ Click [Typical Installation] in the setup menu, and follow the instructions on the screen to complete the installation. USB USB Cable Power Supply USB Cable Notes on connection Make sure to set the Auto Start switch to OFF before connecting the scanner to the computer. If the Auto Start switch is set to OFF after the scanner is connected to the computer, malfunctions may occur. 16