Canon PIXMA MG5220 Solución de problemas de configuración de red - Page 10

ENGLISH Check 3 Is the IP filtering feature enabled on the access point? • For details on how to check settings of the access point, refer to the manual supplied with the access point or contact its manufacturer. Set the access point to accept the IP address of the machine. • For details on how to change settings of the access point, refer to the manual supplied with the access point or contact its manufacturer. • To check the IP address of the machine, use the { or } button to display Setup on the HOME screen and press the right FUNCTION button, then using the { } [ ] and OK buttons, select Device settings > LAN settings > Confirm LAN settings > WLAN setting list to check IP address. Check 4 When obtaining an IP address automatically, make sure that the DHCP function of the access point is active. • For details on how to check settings of the access point, refer to the manual supplied with the access point or contact its manufacturer. Glossary • IP address A numerical identification assigned to each computer or network device connected to a network. • IP address filtering A function to allow or restrict access from network devices with specified IP addresses. • DHCP function A function to automatically assign required information (IP address, etc.) to computers, printers or other devices connected to the network. • Privacy separator feature A function to prevent communication between multiple wireless devices (such as computers and printers) connected to an access point. Activate the DHCP function of the access point, then click Back (A). • For details on how to change settings of the access point, refer to the manual supplied with the access point or contact its manufacturer. Check 5 Is the privacy separator feature enabled on the access point? • For details on how to check the settings of the access point, refer to the manual supplied with the access point or contact its manufacturer. Disable the privacy separator feature. • For details on how to change the settings of the access point, refer to the manual supplied with the access point or contact its manufacturer.