Canon PIXMA MG5722 User Manual - Page 914
Make sure MP Drivers are installed correctly.
View all Canon PIXMA MG5722 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 914 highlights
Reinstall the MP Drivers from the Setup CD-ROM or the Canon website. • Printing does not start even though the machine is connected to the computer using a USB cable and the port named "USBnnn" is selected: In Windows 8.1 or Windows 8, select My Printer on Start screen to start My Printer. If My Printer is not displayed on Start screen, select Search charm, and then search for "My Printer". Set the correct printer port on Diagnose and Repair Printer. Follow the on-screen instructions to set the correct printer port, and then select your machine's name. In Windows 7, Windows Vista, or Windows XP, click Start and select All programs, Canon Utilities, Canon My Printer, Canon My Printer, and then select Diagnose and Repair Printer. Follow the on-screen instructions to set the correct printer port, and then select your machine's name. If the problem is not resolved, reinstall the MP Drivers from the Setup CD-ROM or the Canon website. • Printing does not start even though the port named "CNBJNP_xxxxxxxxxx" is selected when the machine is used over LAN: Launch IJ Network Tool, select "CNBJNP_xxxxxxxxxx" as you checked in step 4, and then associate the port with the printer using Associate Port in Settings menu. If the problem is not resolved, reinstall the MP Drivers from the Setup CD-ROM or the Canon website. Check3 Make sure machine is properly connected to computer. If you are using a USB cable, make sure it is securely connected to both the machine and the computer. When the USB cable is securely plugged in, check the following: • If you are using a relay device such as a USB hub, disconnect it, connect the machine directly to the computer, and retry the printing. If printing starts normally, there is a problem with the relay device. Contact the vendor of the relay device. • There could also be a problem with the USB cable. Replace the USB cable and retry the printing. If you use the machine over a LAN, make sure the machine is correctly set up for network use. Check4 Make sure MP Drivers are installed correctly. Uninstall the MP Drivers following the procedure described in Deleting the Unnecessary MP Drivers and reinstall them from the Setup CD-ROM or the Canon website. Check5 When machine is connected to your computer with a USB cable, check device status from your computer. Follow the procedure below to check the device status. 1. Open the Device Manager on your computer as shown below. If User Account Control screen is displayed, follow the on-screen instructions. • In Windows 8.1 or Windows 8, select Control Panel from Settings charm on Desktop > Hardware and Sound > Device Manager. • In Windows 7 or Windows Vista, click Control Panel, Hardware and Sound, and Device Manager. • In Windows XP, click Control Panel, Performance and Maintenance, System, and Device Manager on Hardware sheet. 2. Double-click Universal Serial Bus controllers and USB Printing Support. 914