Canon PIXMA MP130 PIXMA MP130 Easy Setup Instructions - Page 1

Canon PIXMA MP130 Manual

Get Canon PIXMA MP130 PDF manuals and user guides View all Canon PIXMA MP130 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 1 highlights

Start Here Easy Setup Instructions 1 Unpack and setup the machine. 1 Carefully remove all items from the box. 2 Remove the protective material. 3 Place the machine on a flat surface. 4 Remove all shipping tape and the protective sheet. 5 Lift the Scan Unit (1) until it locks into place, and remove the packing material (2) from the Print Head Holder. 3 Install the print head. 1 Lift the Scan Unit until it locks into place. 2 Open the Paper Output Tray (1). 3 Open the Inner Cover (2). 4 Raise the Lock Lever. • The Print Head Holder moves to the center. Install the print head here (3). (3) (2) (1) 5 Remove the protective cap. 6 Insert the print head. • Do not press it down. (1) (2) Do not touch! 7 Lower the Lock Lever until it locks into place. • Be sure to hold the machine by the side. Do not lift the machine by grasping the Paper Support Extension or the Operation Panel. X Check the contents. • Machine • Print head • Power cord • Ink tanks BCI-24 Black BCI-24 Color • Paper Support Attachment • Safety Instructions • Easy Setup Instructions • Quick Start Guide • Setup CD-ROM The Setup CD-ROM contains the MP Drivers, as well as the electronic manuals User's Guide, Software Guide and Photo Application Guide. Please read these guides. • A printer cable is not included. You must purchase a USB cable (less than 10 ft./3 m) to connect your machine to a computer. • Please note that the items included with your machine may vary depending on the country of purchase. 2 Connect the power cord. 1 Connect the power cord. (2) (1) PLEASE WAIT 2 If the message appears, go to Step 3, "Install the print head." 4 Install the ink tanks. 1 Remove the orange protective cap. Do not touch! 2 Insert the ink tanks. • Insert the black ink tank into the right slot, and the color ink tank into the left slot. IMPORTANT • For correct printer operation, make sure ink tanks are secure in slots. 3 Close the Inner Cover (1) and the Scan Unit (2). (2) 4 If the LCD displays messages asking if you replaced the ink tanks, press [ ] repeatedly to complete the installation. (1) 5 Load the paper. 1 Open the Paper Support (1) and pull up the Paper Support Extension (2) until it stops. • If you are loading the legal-size paper, set the Attachment (3) to the Paper Support. 2 Load the paper with the print side face up. • Ensure the paper stack does not exceed Paper Limit Mark. 3 Pinch and adjust the Paper Guide to the width of the stack. (3) (1) (2) Setup is complete. If you are connecting the machine to a computer for use, see the reverse side for instructions on installing the software. Canon and BCI are registered trademarks and PIXMA is a trademark of Canon Inc. All other products and brand names are registered trademarks or trademarks of their respective owners. Specifications subject to change without notice. HT7-0095-000-V.1.0 xx2004A © CANON INC. 2004 PRINTED IN CHINA

  • 1
  • 2
1
Unpack and setup the machine.
1
Carefully remove all items from the box.
2
Remove the protective material.
3
Place the machine on a flat surface.
4
Remove all shipping tape and the protective sheet.
5
Lift the Scan Unit (1) until it locks into place, and remove the packing material
(2) from the Print Head Holder.
•
Be sure to hold the machine by the side. Do not lift the machine by grasping the Paper Support Extension
or the Operation Panel.
Check the contents.
•
A printer cable is not included. You must purchase a USB cable (less than 10 ft./3 m) to connect your
machine to a computer.
•
Please note that the items included with your machine may vary depending on the country of purchase.
2
Connect the power cord.
2
If the message <PUT IN CARTRIDGE> appears, go to Step 3, “Install the print
head.”
3
Install the print head.
1
Lift the Scan Unit until it locks into place.
2
Open the Paper Output Tray (1).
4
Install the ink tanks.
1
Remove the orange protective
cap.
2
Insert the ink tanks.
•
Insert the black ink tank into the right slot, and the color ink tank into the left slot.
IMPORTANT
•
For correct printer operation, make sure ink tanks are secure in slots.
3
Close the Inner Cover (1) and the Scan
Unit (2).
4
If the LCD displays messages asking if
you replaced the ink tanks, press [
]
repeatedly to complete the installation.
5
Load the paper.
1
Open the Paper Support (1) and pull up the Paper Support Extension (2) until
it stops.
•
If you are loading the legal-size paper, set the Attachment (3) to the Paper Support.
2
Load the paper with the print side face up.
•
Ensure the paper stack does not exceed Paper Limit Mark.
3
Pinch and adjust the Paper Guide to the width of the stack.
Setup is complete.
If you are connecting the machine to a computer for use, see the reverse side for instructions on
installing the software.
•
Machine
•
Power cord
•
Print head
•
Ink tanks
BCI-24 Black
BCI-24 Color
•
Paper Support Attachment
•
Safety Instructions
•
Easy Setup Instructions
•
Quick Start Guide
•
Setup CD-ROM
The Setup CD-ROM contains the MP Drivers, as well as the electronic manuals
User’s Guide
,
Software
Guide
and
Photo Application Guide
. Please read these guides.
1
Connect the power cord.
(1)
(2)
(1)
(2)
P
L
E
A
S
E
W
A
I
T
3
Open the Inner Cover (2).
•
The Print Head Holder moves to the center.
Install the print head here (3).
4
Raise the Lock Lever.
5
Remove the protective cap.
6
Insert the print head.
•
Do not press it down.
7
Lower the Lock Lever until it locks
into place.
(3)
(1)
(2)
Do not touch!
Do not touch!
(2)
(1)
(2)
(1)
(3)
Start Here
Easy Setup Instructions
Canon and BCI are registered trademarks and PIXMA is a trademark of Canon Inc.
All other products and brand names are registered trademarks or trademarks of their respective owners.
Specifications subject to change without notice.
HT7-0095-000-V.1.0
xx2004A
© CANON INC. 2004
PRINTED IN CHINA