Canon PIXMA MP470 MP470 series Easy Setup Instructions - Page 1

Start Here Easy Setup Instructions 1 Prepare the Machine a Unpack the Machine. Confirm the included items against the illustration printed on the lid of the packing box. A USB cable is necessary to connect the machine with your computer. Important When moving the machine, carry the machine at both ends as shown below. Do not lift the machine by grasping the Paper Support Extension. f Plug the power cord in the back of the machine and connect the other end to the wall outlet. Document Cover Power Cord Photo All-in-One Important When cleaning the exterior of the machine, use a soft cloth to wipe it gently. For details, refer to "Cleaning Your Machine" in the Quick Start Guide. 2 Install the FINE Cartridges a Remove the Black FINE Cartridge from its box. d Push up the FINE Cartridge until it clicks into place. Important For correct machine operation, make sure the FINE Cartridge is securely inserted. Click b Place the machine on a flat and horizontal surface, and do not place any objects in front of the machine. Remove all the shipping tapes and protective material on the outside of the machine. Then open the Paper Output Tray. Important • Make sure that the Document Cover is closed. • Do NOT connect the USB cable at this stage. g Open the Operation Panel, then press the ON/OFF button to turn on the machine. The machine will initialize. Wait until the Power lamp stops flashing and remains lit green. b Remove the protective tape gently. Protective Tape e Repeat the procedure for the Color FINE Cartridge, inserting it into the right slot C . Electrical Contacts c Lift the Scanning Unit (Printer Cover), and pull the Scanning Unit Support down into place. Scanning Unit (Printer Cover) h Use the { or } button on the Operation Panel to select the language for the LCD, then press the OK button. d Remove the protective material on the right side. (1) Press the { or } button to select the language. (2) Press the OK button. Important If an unintended language is displayed on the LCD, press the Back button to return to the Language selection screen. Once the message "Set the ink cartridge." appears, go to i. i Lift the Scanning Unit (Printer Cover), and pull the Scanning Unit Support down into place. The FINE Cartridge Holder automatically moves to the left. j Write down the serial number located inside of the machine. You will need this to register your product. Protective Material Caution Before turning on the machine, remove all of the shipping tapes. e Lift the Scanning Unit (Printer Cover) slightly to set the Scanning Unit Support back to its original position, and then gently close the Scanning Unit (Printer Cover). Serial Number Print Head Nozzles Important • Do not touch the electrical contacts or Print Head Nozzles on a FINE Cartridge. The machine may not print out properly if you touch it. • Do not drop or shake FINE Cartridges as this may cause the ink to leak out and stain your clothes and hands. • Do not reattach the protective tape once you have removed it. • Be careful not to stain your hands or surrounding work area with ink on the removed protective tape. c Insert the Black FINE Cartridge slightly slanted into the left slot B . Make sure that the procedure for installing the FINE Cartridges is displayed on the LCD and the FINE Cartridge Holder has moved to the left. f Lift the Scanning Unit (Printer Cover) slightly to set the Scanning Unit Support back to its original position, and then gently close the Scanning Unit (Printer Cover). FINE Cartridge Holder Important Once you have installed the FINE Cartridges, the message "Processing... Please wait momentarily." is displayed on the LCD. Wait until the copy standby screen is displayed before proceeding. It takes about one minute. Hardware setup is now complete. Next, turn over and install the software.