Canon PIXMA MP950 MP950 Easy Setup Instructions - Page 1
Canon PIXMA MP950 Manual
View all Canon PIXMA MP950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Start Here Easy Setup Instructions Unpack the machine Please confirm bundled thing by the illustration printed on the flapped lid of the packing box. 1 Turn on the machine. 1 Unlock the Scanning Unit. (1) Open the Document Cover. (2) Move the Scanner Lock Switch towards the release mark to unlock the Scanning Unit. CAUTION • Make sure to unlock the Scanning Unit before turning the machine on. • Before transporting the machine, always lock the Scanning Unit by moving the Scanner Lock Switch towards the lock mark. release mark 2 Connect the power cord, then press [ON/OFF]. (2) Connect the other end to the AC outlet. (4) Press [ON/OFF]. (1) Connect one end of the power cord to the rear of the machine. (3) Open the Operation Panel. 3 Use [ ] or [ ] on the Operation Panel to select the language for the LCD, then press [OK]. 6 Insert the Print Head. Do not touch! Insert. QT5-0003-V01 7 Lower the lock lever. Lower the lock lever carefully and press it down. 3 Install the ink tanks. 1 Prepare the ink tanks. (1) Peel back the orange tab completely and remove the plastic wrapper from the ink tank. If the orange-colored protective film is not removed completely, problems with printing may occur. 2 Insert the ink tanks. (2) Twist off and discard the orange protective cap located on the bottom of the ink tank. Do not press! IMPORTANT electrical contacts Do not touch the electrical contacts. (1) Insert the ink tank into the rightmost slot. (2) Press the mark on the ink tank until it clicks into place and then its lamp lights red. Refer to the color guide on Click the print head lock lever. 3 Close the Inner Cover and the Scanning Unit (Printer Cover). (1) Press [ ] or [ ] to select the language. (2) Press [OK]. The language setting is only available for some countries. 4 If the message appears, go to Step 2, "Install the Print Head." 2 Install the Print Head. 1 Lift the Scanning Unit (Printer Cover) until it locks into place. Lift the Scanning Unit (Printer Cover). IMPORTANT For safety, always firmly grip the areas illustrated when opening the Scanning Unit (Printer Cover). 2 Pull out the Paper Output Tray extension. If the Paper Output Tray does not open, press the Open Button. When the machine is turned on, lift up the Scanning Unit (Printer Cover) then wait for the Paper Output Tray to open. Pull out the Paper Output Tray extension. 3 Open the Inner Cover. The Print Head Holder moves to the center. Do not touch the Print Head Holder while it is moving. 4 Raise the lock lever. Touch only the lock lever! Raise lock lever completely. Inner Cover Serial Number Location IMPORTANT (US Only) Write down the serial number located inside the machine. You will need this to register your products. 5 Prepare the Print Head. (1) Remove the print head from its package. IMPORTANT If the Scanning Unit (Printer Cover) is left open for more than 10 minutes, the Print Head Holder moves to the right. Close and reopen the Scanning Unit (Printer Cover) to return the Holder to the center. (2) Remove the protective cap and discard it. Do not touch! CAUTION There might be some transparent or light blue ink on the inside of the bag the print head comes in - this has no effect on print quality. Be careful not to get ink on yourself when handling these items. Remove the protective cap and discard it. CAUTION There might be some transparent or light blue ink on the inside of the protective cap - this has no effect on print quality. Be careful not to get ink on yourself when handling these items. Close the Inner Cover. Click IMPORTANT For safety, always firmly grip the areas illustrated when closing the Scanning Unit (Printer Cover). 4 Align the Print Head from the Operation Panel. This procedure is necessary to obtain a beautiful print result. The Print Head positions is automatically aligned. When the pattern shown on step 3-(3) is printed, the alignment is completed. Be sure to align the Print Head to ensure print quality. 1 Open the Paper Support, then pull out the extension. (1) Open the Paper Support. (2) Pull out the extension until it stops. (3) Pinch and slide the paper guide to the left end. 2 Load a few sheets of letter- or A4-size blank paper into the Auto Sheet Feeder. Ensure the paper stack does not exceed the paper limit mark ( ). (1) Load the paper with the print side face up. (2) Pinch and adjust the paper guide to the width of the stack. 3 Press [OK] to start Print Head alignment. (1) This message appears. (2) Make sure is selected, then press [OK]. If this message does not appear after closing the Scanning Unit (Printer Cover), see "Aligning The Print Head automatically" in the User's Guide. Align the paper with the cover guide, then slide the paper guide toward the left edge of the paper. (3) The machine will print the Print Head position pattern and automatically align the Print Head. The pattern is printed in black and blue. • Print head alignment will take several minutes to complete. Do not start another operation here. • If the printed pattern matches the illustration, Print Head alignment is complete. You can change the language displayed on the LCD. For details, see "Selecting the Language for the LCD" in the Quick Start Guide. Hardware setup and Print Head alignment is complete. If you are connecting the machine to a computer for use, see the rear side of this sheet for instructions on installing the software. "Windows" is a trademark of Microsoft Corporation, registered in the United States and other countries. "Macintosh" and "Mac" are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. Specifications are subject to change without notice. xx2005A © CANON INC. 2005 © ArcSoft, Inc. All rights reserved for PhotoStudio. PRINTED IN THAILAND