Canon PIXMA SELPHY CP910 User Guide - Page 36

Printing from a Computer Confirming Access Point Compatibility • Before you can print via Wi-Fi from a computer, the computer with the images to send must be connected to an access point. • Use an access point that supports the following Wi-Fi standards. To check the standards your access point supports, refer to the access point user manual. Standards Supported Channels Transmission Methods Security IEEE 802.11b/g 1 - 11 DSSS (IEEE 802.11b) and OFDM (IEEE 802.11g) No security, 64- and 128-bit WEP (open system authentication), WPA-PSK (TKIP), WPA-PSK (AES), WPA2-PSK (TKIP), and WPA2-PSK (AES) • Confirm that the access point supports WPS (Wi-Fi Protected Setup). WPS-Compatible Access Points Non-WPS Access Points Or WPS Support Unknown Connect as described in "WPS-Compatible Access Points" (=37)*. Check the following information and connect as described in "Non-WPS Access Points" (=39). - Network name (SSID/ESSID) - Network authentication / data encryption (encryption method or mode) - Password (network key) * WPS connections are not possible for access points set up for WEP security. Connect as described in "Non-WPS Access Points" (=39). • If your network is managed by a system administrator, ask the administrator for network setting details. Cover Contents Part Names Basic Operations Print Settings Printing via Wi-Fi Printing via USB Cable Troubleshooting Appendix 36