Canon PIXMA TS5320 TS5300 series User Manual - Page 216

Note • To show the password, select ON. To hide the password, select OFF. • The password is required when connecting a device to the printer. Depending on the device you are using, no password is required. • When you connect a Wi-Fi Direct compatible device to the printer, select the device name displayed on the LCD from your device. • To update the identifier (SSID) and the password, see below. Changing Wireless Direct Setting Changing Settings of a Device and Connecting It to the Printer 1. Turn on Wi-Fi function on your device. Enable "Wi-Fi" on your device's "Setting" menu. For more on turning on Wi-Fi function, see your device's instruction manual. 2. Select "DIRECT-XXXX-TS5300series" ("X" represents alphanumeric characters) from list displayed on your device. Note • If "DIRECT-XXXX-TS5300series" does not appear on the list, Wireless Direct is not enabled. See Changing Printer Setting to Use Wireless Direct to enable Wireless Direct. 3. Enter password. Your device is connected to the printer. Note • Check the password for the Wireless Direct. Check by one of the following methods. Display on the LCD of the printer. LAN settings Print the network settings. Printing Network Settings • Depending on the device you are using, entering the password is required to connect a device to the printer via Wi-Fi. Enter the password specified for the printer. • If your Wi-Fi Direct compatible device is set to prioritize using Wi-Fi Direct and it is connecting to the printer, the printer displays a confirmation screen asking if you allow the device to connect to the printer. Make sure the name on the LCD is the same as that of your wireless communication device and select Yes. 216